Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support
grinding.svg
P
grinding
Number of products: 201
Application: grinding
Metal: steels [P]

TRIM® 9106

Synthetic

TRIM 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. Recommended for grinding operations on cast iron, aluminum, and steels. Will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. Contains no sulfur, phosphorus, chlorine, or other halogens.

  • Low mist
  • Low foam
  • Moderate pH
  • Very low odor
  • Clear working solution
  • Very operator, machine, and environmentally friendly
  • Will not form ammonia or other gases when grinding or machining cast iron
  • Inhibits chip packing and clinkering
  • Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Very low carryoff for extremely low fluid operating costs
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C118

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270 bd

High-performance Synthetic - Blue Dye

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG

High-performance Synthetic

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C270CG bd

High-performance Synthetic - Blue Dye

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

TRIM® C276

Clean-running Synthetic

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odor which dissipates further after one or two days
  • Minimizes the buildup of sticky residues

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® C390

High Performance Aerospace Synthetic

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206

Long-life Emulsion

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion - No Dye

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion - No Dye

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion - No Dye

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion - No Dye

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion - No Dye

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E206 nd

Long-life Emulsion - No Dye

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® E715

Multi-metal Machining Emulsion

TRIM E715 is a high quality, universal, soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs very well. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Non-chlorinated and non-sulphurized extreme pressure (EP) additives control built-up edge (BUE)
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron, and yellow metals
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

TRIM® E860

Low-foam, High-lubricity Emulsion

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925

Chlorine-free, High-performance Emulsion

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925AE

DCHA-free, High-performance Emulsion

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

  • DCHA free
  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925AE

DCHA-free, High-performance Emulsion

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

  • DCHA free
  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925AE

DCHA-free, High-performance Emulsion

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

  • DCHA free
  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® E925AE

DCHA-free, High-performance Emulsion

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

  • DCHA free
  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM® MicroSol® 485

Long-life Ferrous Semisynthetic

TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 485

Long-life Ferrous Semisynthetic

TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 485

Long-life Ferrous Semisynthetic

TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 485

Long-life Ferrous Semisynthetic

TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 485

Long-life Ferrous Semisynthetic

TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 555

High-lubricity, Semisynthetic Metalworking Fluid

TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 555

High-lubricity, Semisynthetic Metalworking Fluid

TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 555

High-lubricity, Semisynthetic Metalworking Fluid

TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 555

High-lubricity, Semisynthetic Metalworking Fluid

TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 555

High-lubricity, Semisynthetic Metalworking Fluid

TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 555

High-lubricity, Semisynthetic Metalworking Fluid

TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM® MicroSol® 606

Long-life Microemulsion

TRIM MicroSol 606 is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

TRIM® MicroSol® 606

Long-life Microemulsion

TRIM MicroSol 606 is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

TRIM® MicroSol® 606 bd

Long-life Microemulsion - Blue Dye

TRIM MicroSol 606 bd is a blue dyed, microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

TRIM® MicroSol® 606 bd

Long-life Microemulsion - Blue Dye

TRIM MicroSol 606 bd is a blue dyed, microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

TRIM® MicroSol® 642RX

High-lubricity, Low-foam, Medical Grade Microemulsion

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

TRIM® MicroSol® 642RX

High-lubricity, Low-foam, Medical Grade Microemulsion

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

TRIM® MicroSol® 642RX

High-lubricity, Low-foam, Medical Grade Microemulsion

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

TRIM® MicroSol® 642RX

High-lubricity, Low-foam, Medical Grade Microemulsion

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

TRIM® MicroSol® 642RX

High-lubricity, Low-foam, Medical Grade Microemulsion

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

TRIM® MicroSol® 685

High-lubricity Semisynthetic Metalworking Fluid

TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

TRIM® MicroSol® 685

High-lubricity Semisynthetic Metalworking Fluid

TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

TRIM® MicroSol® 685

High-lubricity Semisynthetic Metalworking Fluid

TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

TRIM® MicroSol® 685

High-lubricity Semisynthetic Metalworking Fluid

TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

TRIM® MicroSol® 685

High-lubricity Semisynthetic Metalworking Fluid

TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

TRIM® MicroSol® 685

High-lubricity Semisynthetic Metalworking Fluid

TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

TRIM® MicroSol® 685XT

High-lubricity, Low-foam Semisynthetic

TRIM MicroSol 685XT is a high-lubricity, low-foaming, extended sump life semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides superior cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. An excellent alternative to soluble oils on high-silica aluminum alloys, Microsol 685XT is compatible with a wide range of materials.

  • High lubricity for extended tool life
  • Low foaming for today's high-pressure, high-volume coolant delivery systems
  • Excellent sump life without the use of tank side additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Extremely hard water stable
  • Forms a tight microemulsion for low carryoff
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 692XT

Premium, High-lubricity, Low-foam Microemulsion

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

TRIM® MicroSol® 692XT

Premium, High-lubricity, Low-foam Microemulsion

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

TRIM® MicroSol® 692XT

Premium, High-lubricity, Low-foam Microemulsion

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

TRIM® MicroSol® 692XT

Premium, High-lubricity, Low-foam Microemulsion

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

TRIM® MicroSol® 692XT

Premium, High-lubricity, Low-foam Microemulsion

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

TRIM® OM 100

Nonchlorinated Cutting Oil

TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

TRIM® OM 100

Nonchlorinated Cutting Oil

TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

TRIM® OM 100

Nonchlorinated Cutting Oil

TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

TRIM® OM 100

Nonchlorinated Cutting Oil

TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

TRIM® OM 100

Nonchlorinated Cutting Oil

TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

TRIM® SC230

Oil-rejecting Semisynthetic

TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230

Oil-rejecting Semisynthetic

TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230

Oil-rejecting Semisynthetic

TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230CG

Oil-rejecting Semisynthetic

TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230CG

Oil-rejecting Semisynthetic

TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230CG

Oil-rejecting Semisynthetic

TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230CG nd

Oil-rejecting Semisynthetic - No Dye

TRIM SC230CG nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230CG nd

Oil-rejecting Semisynthetic - No Dye

TRIM SC230CG nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230CG nd

Oil-rejecting Semisynthetic - No Dye

TRIM SC230CG nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230 nd

Oil-rejecting Semisynthetic - No Dye

TRIM SC230 nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230 nd

Oil-rejecting Semisynthetic - No Dye

TRIM SC230 nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC230 nd

Oil-rejecting Semisynthetic - No Dye

TRIM SC230 nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC520

General-purpose Semisynthetic

TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC536

Low-oil Semisynthetic

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM® SC620

Premium Low-oil Semisynthetic

TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

TRIM SOL®

General-purpose Emulsion

TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM SOL®

General-purpose Emulsion

TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

TRIM® VHP® E210

Very High-pressure, Chlorine-free Emulsion

TRIM VHP E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

TRIM® VHP® E210

Very High-pressure, Chlorine-free Emulsion

TRIM VHP E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

TRIM® VHP® E320

Very High-pressure, High-lubricity Emulsion

TRIM VHP E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little- to no- foam.

  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

TRIM® VHP® E320

Very High-pressure, High-lubricity Emulsion

TRIM VHP E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little- to no- foam.

  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques