Maintenance Cleaners

Master STAGES™ CLEAN AMO™ A maize `N Orange™ is a natural-solvent cleaner that can be mixed with water and used for a wide range of industrial cleaning jobs. CLEAN AMO does an outstanding job removing oily, greasy, or resinous soils at room temperature.

• CLEAN AMO cleans with natural solvents extracted from corn (maize) and oranges (d-limonene), along with several additional ingredients that improve performance and water mixability
• With a neutral pH and low conductivity, AMO will not cause splitting of TRIM coolants
• Compatible with ultrafiltration systems and bioremediation
• Unlike most water-mixable degreasers, CLEAN AMO does not require heating to remove greases and resins
• AMO can be used straight (100%) or cut back with water depending on the application
• There are no mineral oils or petroleum solvents in CLEAN AMO
• AMO can be used for general cleaning tasks and to remove soils from parts, tools, and machines
• Users like CLEAN AMO's very mild, pleasant orange scent
• Environmental approvals are simplified because CLEAN AMO contains no nitrites, barium, phenols, or butyl cellusolve and has no SARA 313 reportable ingredients
• Effective mop bucket cleaner
• For use in floor scrubber machines
• Rinses off easily with plain water

Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

• With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants
• Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
• CLEAN F2 has been proven nonirritating to skin at 20% concentration
• Excellent choice for use in spray bottles up to 20%
• Use for general cleaning tasks and to remove soils from parts and tools
• Operators like CLEAN F2's mild, pleasant citrus scent
• Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients
• Effective mop bucket cleaner
• Use in floor scrubber machines
• Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

Master STAGES™ SkidRid™ is a highly concentrated cleaner built for multiple uses including floor cleaning and general degreasing. In addition to automatic floor scrubbers, it does a great job in general purpose cleaning, mop bucket cleaning, and parts washing in room-temperature wash tanks. SkidRid is completely free of 2-butoxyethanol (Butyl) and is not reportable under SARA section 313.

• Specially formulated to lift off stubborn tire marks — pre-application from a spray bottle followed by power floor scrubbing can often deal with the most difficult areas
• Contains no 2-butoxyethanol (Butyl), an ingredient of increasing concern often found in products of this type
• All of the ingredients used in SkidRid are biodegradable
• Economical to use because it is very highly concentrated — a little bit goes a long way
• Can be used for general cleaning tasks and to remove soils from parts and tools
• Hard water tolerant
• Mild, pleasant scent
• Environmental approvals are simplified because SkidRid contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and is not SARA 313 reportable
• Effective in immersion style washers and ultrasonic baths can be used at room temperature up to 120°F (49°C)
• Effective mop bucket cleaner in addition to being useful in floor scrubber machines
• Removes heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; thereby suitable for concrete, painted tile, or linoleum floors

Master STAGES™ Skramex™ is a super concentrated, high-powered cleaner designed for factory floor cleaning and heavy maintenance cleaning, particularly in metalworking or rebuild shops and mills. This product is highly caustic and capable of emulsifying even the most difficult floor soils such as those used in machining, drawing, stamping, foundries, and mills. Skramex is specially formulated without 2-butoxyethanol (Butyl) to eliminate government reporting requirements.

• Economical because it is super concentrated, Skramex will clean most soils at concentrations of 0.5% or less when used in a power floor scrubber
• Skramex is formulated specially to remove oils, drawing compounds, carbon residue, and other heavy soils, while not harming concrete (this can be a problem with cheap floor cleaners)
• Not just a floor cleaner, Skramex works in both power floor scrubbers and mop buckets, and can be used for very heavy-duty maintenance cleaning jobs; also effective and economical when used as a cold-soak cleaner for ferrous parts
• Your floor scrubber or mop bucket will go further and last longer because Skramex has super high concentrations of surfactants, solvents, and alkaline builders to make it last a long time (this saves you time and reduces waste because you can spend more time cleaning and have less dirty water to dispose of)
• Environmental approvals are simplified because Skramex contains no nitrites, phosphates, barium, phenols, or 2-butoxyethanol (Butyl); this formula has very low V.O.C. content and no SARA 313 reportable ingredients

Master STAGES™ Task2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.

• Use full strength or dilute
• Versatile all-around shop cleaner
• Pratt Whitney Aerospace Approval PMC 1455-11
• Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
• Very low V.O.C. content, and conductivity
• Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
• Will not harm TRIM metalworking fluids

Master STAGES™ Task2™ Glass Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning machine tool glass and other hard surfaces.

• Use full strength
• For glass and plexiglas shop cleaning
• Pratt Whitney Aerospace Approval PMC 1406-41
• Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
• Very low V.O.C. content, and conductivity
• Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
• Will not harm TRIM metalworking fluids

Master STAGES™ Task2™ is a grime fighting, industrial strength, non-butyl, water-based cleaning agent that does an outstanding job in the industrial, commercial, or office environment. Task2 out-cleans all the green, crystal, purple, "mean", "complex", and "simple" butyl-based products you may have tried in the past.

• Use full strength or dilute up to 100:1
• For the toughest industrial cleaning applications
• Pratt Whitney Aerospace Approval PMC 1247-1
• Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
• Very low V.O.C. content, and conductivity
• Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
• Will not harm TRIM metalworking fluids

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws many years of hands-on experience in machine clean outs
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws on many years of hands-on experience in machine cleanouts
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways