TRIM® MicroSol® semisynthetic microemulsion coolants deliver high-performance lubricity and ultimately lower costs. Achieve precision parts, exceptional tool life, extended sump life, assured regulatory compliance, and greater profitability with the MicroSol product just right for your production.
Designed to meet the rigorous demands of the aerospace, medical, automotive, and high production, precision parts manufacturing industries, there's a MicroSol to answer your concerns, ramp up your production, and boost your bottom line.
TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.
Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.
Low foaming for today's demanding high-pressure, high-volume applications
Also for machining some aluminum alloys and nonferrous metals
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Requires no special disposal or recycling
10 Reasons to test TRIM® MicroSol® 455
TRIM® MicroSol® 465
Low-foam Semisynthetic
TRIM MicroSol 465 low-foam semisynthetic microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 465 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.
Delivering extended sump life, machine-friendly MicroSol 465 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 465.
Easy to maintain and hard water stable
Low foaming for today's demanding high-pressure, high-volume applications
Also for machining some aluminum alloys and nonferrous metals
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Requires no special disposal or recycling
Ian Sandusky / Practical Machinist Interview at IMTS 2024
TRIM® MicroSol® 485
Long-life Ferrous Semisynthetic
TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.
The most cost conscience MicroSol offering
Dramatically extends useful life without the need for tank-side biocides or fungicides
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol® 555
High-lubricity, Semisynthetic Metalworking Fluid
TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Has exceptional sump life without the use of tank-side additives
Reduces oil mist and residues often associated with high-lubricity alternatives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Forms stable microemulsion in hard-water environments
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol® 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
Optimized combination of cooling and lubricity for titanium machining applications
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT
TRIM® MicroSol® 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications and has received many aerospace approvals
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol® 590XT
TRIM® MicroSol® 606
Long-life Microemulsion
TRIM MicroSol 606 is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.
Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
Contains very effective, extreme-pressure additives to control built-up edge
Compatible with all ferrous and nonferrous materials
Very fine emulsion gets to the point of cut
Rejects tramp oil to extend sump life and increase recycling options
Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
Easily recycled or disposed of with conventional techniques and equipment
Very stable with long sump life and minimal carryoff
Runs for long periods without the need for costly additives
TRIM® MicroSol® 606 bd
Long-life Microemulsion - Blue Dye
TRIM MicroSol 606 bd is a blue dyed, microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.
Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
Contains very effective, extreme-pressure additives to control built-up edge
Compatible with all ferrous and nonferrous materials
Very fine emulsion gets to the point of cut
Rejects tramp oil to extend sump life and increase recycling options
Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
Easily recycled or disposed of with conventional techniques and equipment
Very stable with long sump life and minimal carryoff
Runs for long periods without the need for costly additives
TRIM® MicroSol® 642RX
High-lubricity, Low-foam, Medical Grade Microemulsion
TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.
Conformance to EH&S requirements for the medical industry
Improved lubricity for longer tool life
Extended useful life without the need for tank-side biocides or fungicides
Halogen free formulation
Low foaming for today’s demanding high-pressure, high-volume applications
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Superior corrosion inhibition on all ferrous and nonferrous metals
High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
Ease of disposal with no special disposal or recycling techniques or requirements
TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Reduces oil mist and residues often associated with high-lubricity alternatives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Forms stable microemulsion in hard water environments
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Has exceptional sump life without the use of tank side additives
Uses standard metalworking recycling and disposal techniques
Performs well where traditional soluble oils may not cool sufficiently
Types of Metalworking Fluids – Featuring Abom79 aka Adam Booth
TRIM® MicroSol® 685lf
High-lubricity, Low-foam Semisynthetic
TRIM MicroSol 685lf is a high-lubricity, low-foaming, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Reduces oil mist and residues often associated with high-lubricity alternatives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Exceptional form inhibition in both soft and hard water environments
Forms stable microemulsion in hard water environments
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Performs well where traditional soluble oils may not cool sufficiently
TRIM® MicroSol® 685XT
High-lubricity, Low-foam Semisynthetic
TRIM MicroSol 685XT is a high-lubricity, low-foaming, extended sump life semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides superior cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. An excellent alternative to soluble oils on high-silica aluminum alloys, Microsol 685XT is compatible with a wide range of materials.
High lubricity for extended tool life
Low foaming for today's high-pressure, high-volume coolant delivery systems
Excellent sump life without the use of tank side additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Extremely hard water stable
Forms a tight microemulsion for low carryoff
Uses standard metalworking recycling and disposal techniques
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Boron and halogen free
Low foaming for todays demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Tools last longer cutting Inconel® with TRIM® MicroSol® 690XT
TRIM® MicroSol® 692XT
Premium, High-lubricity, Low-foam Microemulsion
TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!
Improved lubricity for longer tool life
Dramatically extends useful life without the need for tank-side biocides or fungicides
Halogen free
Low foaming for todays demanding high-pressure, high-volume applications
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Requires no special disposal or recycling techniques
