Synthetics Cutting & Grinding Fluids

TRIM 229 is a synthetic coolant that delivers maximum chemical corrosion inhibition on ferrous materials with no residual film at the lowest possible cost. TRIM 229 is often used in surface grinding where maximum cooling and minimum foam are desirable. TRIM 229 is also used in other situations including: water tables on plasma torches, leak detection dip tanks, abrasive cut-off machines, and water-jet cutting systems.

• Highly concentrated for very low-cost working solutions
• Keeps grinding wheels clean and the work piece cool
• Rapidly settles fines
• Nonfoaming
• Low mist
• Low odor
• Very low residue for easy cleaning
• Provides good corrosion inhibition on all common ferrous materials
• Rejects tramp oil for easy skimming and cleaning
• Easy recycling or disposal with conventional techniques and equipment

TRIM 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. Recommended for grinding operations on cast iron, aluminum, and steels. Will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. Contains no sulfur, phosphorus, chlorine, or other halogens.

• Low mist
• Low foam
• Moderate pH
• Very low odor
• Clear working solution
• Very operator, machine, and environmentally friendly
• Will not form ammonia or other gases when grinding or machining cast iron
• Inhibits chip packing and clinkering
• Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
• Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
• Very low carryoff for extremely low fluid operating costs
• Easy recycling or disposal with conventional techniques and equipment

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after one to two days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor which usually disappears after one to two days

TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor which usually disappears after one to two days

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

• Very low foam and mist
• Provides excellent corrosion inhibition on all common ferrous alloys
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
• Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
• Extremely low carryoff for very low total operation costs
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odor which dissipates further after one or two days
• Minimizes the buildup of sticky residues

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C320 is a high-lubricity, low-foam, synthetic coolant that approaches the "down-the-hole" machining performance of premium soluble oils. This product is exceptionally good on aluminum. Even with its very high performance, C320 meets or exceeds most stringent environmental standards.

• Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives
• A very versatile product which works well in mixed-metal situations
• Provides good corrosion inhibition on all common ferrous and nonferrous alloys
• Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal
• Operators like C320's very low odor, low foam, low mist, and light yellow working solution
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts
• Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
• Exceptional sump life, great resistance to fungus and bacteria, and good tramp oil rejection
• C320 is a super product for aluminum wheel machining

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM HD is a synthetic stamping fluid for light-to-moderate duty stamping, drawing, and forming and can also be used for general machining and grinding of ferrous materials. It utilizes a proprietary blend of heavy-duty boundary and extreme pressure lubricity agents for improved performance on stainless steel, super alloy, and most soft aluminum.

• Lubrication package protects machines and extends the life of the die
• Provides rapid and effective cooling and reduces machining forces through the use of EP additives and boundary lubricants
• Has superior anti-weld action to control built-up edge and chip welding
• Compatible with all ferrous and most nonferrous materials
• Broad range of applications by using different concentrations for different applications
• Fully compatible with most nonmetallic materials
• A superior product for low-speed, high-pressure operations such as production band sawing and drilling
• Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools

TRIM MIST is a surface active synthetic coolant concentrate for spray mist operations. It is a clear and virtually odorless fluid that controls the overspray that is common with standard cutting and grinding fluids. It works well in cutting/grinding operations or where spray mists are used on boring mills and high-speed face milling.

• Provides rapid and effective cooling
• Keeps grinding wheels clean and free of loading
• Has superior anti-weld action to control built-up edge and chip welding
• Compatible with all ferrous and most nonferrous materials
• Compatible with most nonmetallic materials
• Has very low odor and is pleasant to work with
• Contains no oil to leave slippery films on the work piece, the machine, or in the surrounding area
• Has a very low initial odor level which usually disappears after using for one-to-two days
• Will keep your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools
• Has exceptional sump life and very good tramp oil rejection