New Products

TRIM MicroSol 465 low-foam semisynthetic microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 465 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 465 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 465.

• Easy to maintain and hard water stable
• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminum alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM MicroSol 685XT is a high-lubricity, low-foaming, extended sump life semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides superior cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. An excellent alternative to soluble oils on high-silica aluminum alloys, Microsol 685XT is compatible with a wide range of materials.

• High lubricity for extended tool life
• Low foaming for today's high-pressure, high-volume coolant delivery systems
• Excellent sump life without the use of tank side additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Extremely hard water stable
• Forms a tight microemulsion for low carryoff
• Uses standard metalworking recycling and disposal techniques

Master STAGES™ CLEAN 2118 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces.

• Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2118 an excellent choice where rapid buildup of coolant carryover creates a foam problem
• Provides excellent short-term corrosion inhibition on most common ferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level
• Exceptional sump life and great tramp oil rejection

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E715 is a high quality, universal, soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs very well. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Non-chlorinated and non-sulphurized extreme pressure (EP) additives control built-up edge (BUE)
• Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron, and yellow metals
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after one to two days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM OM220SCF is a high quality, straight cutting oil designed for general machining operations on both ferrous and non-ferrous alloys. It contains a balanced extreme pressure additive package without the use of chlorine or sulfur. The use of TRIM OM220SCF ensures excellent tool life and surface finishes. TRIM OM220SCF is safe for use on aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze.

• Low odor and low misting
• Excellent oxidative stability
• Formulated to handle a variety of applications
• Excellent compatibility with copper containing alloys
• Sulphur and chlorine free extreme-pressure additive package for efficient metal removal
• Has replaced dark, heavy active sulphur/chlorine oils in several operations while providing superior results in tool life

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements