Fluid Products / Medical

This product has Rolls Royce Approval CSS 130

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, machine cleanliness and meets the needs of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulphur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimise the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odour which dissipates further after one or two days

TRIM C274 is a high-performance synthetic fluid for working cast iron and steel alloys as well as corrosion resistant alloys such as inconel and titanium. TRIM C274 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C274 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes.

• Very stable formula provides long operational life with consistent performance
• Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE)
• Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding
• Extremely low foam in mineral free water
• Excellent tramp oil rejection
• Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easy recycling or disposal with conventional techniques and equipment

TRIM C276WP is a synthetic coolant concentrate which operates at very high fluid pressures and volumes with little or no foam. TRIM C276WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C276WP has superior cooling, rust prevention and chip settling characteristics of a premium synthetic product combined with excellent compatibility with sensitive aluminium alloys.

• Very stable formula provides long operational life with consistent performance
• Extremely low foam in mineral free water
• Excellent compatibility with sensitive aluminium alloys
• Excellent tramp oil rejection
• Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easy recycling or disposal with conventional techniques and equipment

TRIM E730 is a boron-free, high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM E730 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
• Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Suitable for machining aluminium alloys, steel alloys, nickel alloys, cast iron and yellow metals
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

• Delivers unparalleled lubricity
• Very long sump life and low carry-off rates result in low operating cost
• Low foam even in soft water areas
• Hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
• Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel^®, it also offers the superior lubricity necessary for machining soft, gummy aluminium alloys. Delivering low foam, low odour and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

• Exceptional performance on hard aerospace metals
• Superior lubricity for machining softer aluminium alloys
• Trouble-free production
• Safest, environmentally-friendly ingredients
• Long-running lifespan delivers high customer value
• Less scrap, low foam and low odour

TRIM MicroSol 515 is a medium to high lubrication, semi-synthetic microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you would expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding cast iron it does very well in mixed metal situations and is a proven performer when machining aluminium, inconel and titanium alloys.

• Medium to high levels of lubrication without chlorinated or sulphurised EP additives
• Compatible with aluminium, all steels, yellow metals and cast iron
• Extremely hard water tolerant
• Alternative to emulsion products for machining of high silica aluminium alloys
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• No aggressive biocides
• Easily recycled or disposed of without special handling or equipment
• Contains no DEA, chlorine, sulphur, nitrites, formaldehyde releasers or phenolic compounds

TRIM MicroSol 519 is a medium to high lubricity, semisynthetic, microemulsion coolant. The formula provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. Whilst it is particularly suited to machining and grinding cast iron and steel, it does very well in mixed metal situations and is a proven performer on aluminium alloys, stainless steels and titanium.

• Formaldehyde releaser and boron free
• Low foaming for modern high-pressure, high-volume applications
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Optimised combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding grey iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank side biocides or fungicides
• Formaldehyde free
• Low foaming for demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including steels, copper and aluminium alloys, and many plastics and composites
• Optimised combination of cooling and lubricity for titanium machining applications
• Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
• Contains no nitrites, phenols and chlorinated or sulfurised EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminium alloys
• Contains no nitrites, triazines, phenols, chlorinated or sulfurised EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM OE105 is an ester based neat grinding oil formulated for fine grinding and superfinishing. TRIM OE105 imparts excellent lubricity whilst keeping grinding wheels and stones extremely clean. This ensures fantastic surface finishes on hardened steel alloys, stainless steels and non-ferrous materials

• Excellent extreme-pressure additive package for efficient metal removal
• Very high lubricity
• Great detergency
• Fully saturated ester ensures unsurpassed oxidation stability
• Ester based formulation ensures very low misting potential
• Very high flash point for such a low viscosity product
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE209 is a medium to heavy-duty neat cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximise tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

• Extremely high lubricity ensures fantastic tool life
• Excellent detergency keeps grinding wheels clean
• Does not leach cobalt from carbide tool alloys
• Chlorine and sulphur free
• Readily biodegradable
• Saturated ester based formulation ensures very low foam and misting
• Very High flash point
• Unsurpassed oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE310 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Low viscosity ensures excellent chip removal in deep-hole drilling
• Ester based formulation ensures very low misting potential
• Very high flash point
• Good oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE315 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Low viscosity ensures excellent chip removal in deep-hole drilling
• Ester based formulation ensures very low misting potential
• Very high flash point
• Good oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE322 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Extremely low misting potential even with high-pressure chip-breaker units
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE330 NS is a very heavy-duty neat cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion-resistant steel alloys. TRIM OE330 NS is especially effective in slow-speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high-odour neat oils used in Sunnen honing machines.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Extremely low misting potential even with high pressure chip-breaker units
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE335 is a heavy-duty neat cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximise tool life in operations such as gear hobbing.

• Extremely high lubricity ensures fantastic tool life
• Readily biodegradable
• Ester-based formulation ensures very low misting potential
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent friction reducing properties ensures long wheel life
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light colour and low odour for good operator acceptance

TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent lubricity and EP properties ensures long wheel life and good surface finish
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light colour and low odour for good operator acceptance

TRIM OG225 is a medium to heavy-duty neat oil designed for use in grinding operations of hardened steel alloys, tool steels, stainless steels, Inconel^® and titanium. A carefully selected extreme pressure/anti-wear package together with great detergency ensures TRIM OG225 provides very high stock removal rates in flute grinding without burning. It is also formulated to comply with aerospace regulations, i.e. no chlorine and no active sulphur additives. TRIM OG225 can also be used to machine all materials, including yellow metals, in high-pressure applications where low oil mist is advantageous.

• Excellent extreme-pressure/anti-wear additive package for efficient metal removal
• Excellent filterability in precoat filter systems
• Hydrocracked base oil ensures very low misting potential
• Very High flash point
• Low foaming
• Excellent oxidation stability
• Excellent compatibility with copper containing alloys
• Light colour and low odour for good operator acceptance

Master STAGES CLEAN 2020 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminium in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020's oil rejecting properties mean longer bath life and economical operation.

Ingredients acc. to EU Detergent Regulation (RE (EC) No 648/2004)

• Excellent cleaning in immersion and ultrasonic tanks
• Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
• An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminium, and copper alloy parts
• Will provide extended in-process tarnish resistance on copper and copper alloy parts
• Safe on aluminium, aluminium alloy, and magnesium
• Will remove coolant residues as well as straight oils

This Product has Rolls Royce Approval CSS203

Master STAGES Whamex is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

Ingredients acc. to EU Detergent Regulation (RE (EC) No 648/2004)

• A very specialized formula that draws many years of hands-on experience in machine clean outs
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content
• When used as directed below, this product is compatible with TRIM brand semisynthetic, and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Whamex will cause foaming in machines and systems running synthetic products. The use of non-foaming Whamex XT™ is recommended in such cases.
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Master STAGES Whamex XT is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

Ingredients acc. to EU Detergent Regulation (RE (EC) No 648/2004)

• A very specialized formula that draws on many years of hands-on experience in machine cleanouts
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content
• When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways