Forming - Neat Fluids

WEDOLiT FN 1170-225 is a medium viscous, chlorine containing forming oil for tube drawing and other cold forming operations of steel. The product offers also an excellent performance for precision cutting operations. The undiluted product is usually applied by spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 1190-2300 is a highly viscous, chlorine containing forming oil for tube drawing and other cold forming operations of stainless steel. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Soluble in chlorinated hydrocarbons

WEDOLiT FN 1430-115 is a medium viscous, water-insoluble lubricant for tube drawing and other cold forming operations of non-ferrous metals. The undiluted product is usually applied by spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Evaporates at temperatures T ≥ 300°C without leaving any residues or stains on the metal surface, therefore, no preliminary degreasing is necessary before a potential soft annealing

WEDOLiT FN 1430-220 is a high viscous, water-insoluble lubricant for tube drawing and other cold forming operations of aluminium and non-ferrous metals. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Evaporates at temperatures T ≥ 300°C without leaving any residues or stains on the metal surface, therefore, no preliminary degreasing is necessary before a potential soft annealing

WEDOLiT FN 1430-60 is a non-water soluble forming agent of low viscosity, based on environmentally compatible, synthetic compounds. It is successfully used as a minimum quantity lubricant for the treatment of aluminium, non-ferrous metals and steel, respectively as an assembly lubricant for parts of plastic material or metal. WEDOLiT FN 1430-60 is usually used as a concentrate.
Before soft-annealing, a degreasing of parts, which were treated with WEDOLiT FN 1430-60, is not necessary, because it evaporates at temperatures over 300°C without leaving stains or carbon residues.
The product may become cloudy at storage temperatures lower than 10 degrees Celsius. The process is reversible by warming up to room temperature (ca. 20°C).

WEDOLiT FN 1450-850 is a high viscous, water-insoluble lubricant for tube drawing and other cold forming operations of aluminium and non-ferrous metals. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Evaporates at temperatures T ≥ 300°C without leaving any residues or stains on the metal surface. Therefore, no preliminary degreasing is necessary before a potential soft annealing

WEDOLiT FN 1470-300 is a medium-viscosity, non-water-soluble forming agent based on environmentally friendly, fully synthetic compounds. It is successfully used for forming stainless steel, steel, and non-ferrous alloys.
WEDOLiT FN 1470-300 is generally used as an undiluted concentrate.
WEDOLiT FN 1470-300 can be easily removed with organic solvents (such as petroleum) or water-soluble alkaline cleaners.
Parts treated with WEDOLiT FN 1470-300 do not need to be degreased before soft annealing. WEDOLiT FN 1470-300 evaporates without leaving any residue at temperatures above 300°C and does not leave any stains or coking residues.

WEDOLIT FN 1490-30 is a low viscous, water-insoluble lubricant for tube drawing and other cold forming operations of aluminium and non-ferrous metals. The undiluted product is usually applied by spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Evaporates at temperatures T ≥ 300°C without leaving any residues or stains on the metal surface. Therefore, no preliminary degreasing is necessary before a potential soft annealing

WEDOLiT FN 1530-650 is a highly viscous, non-water soluble lubricant suitable for tube, bar and wire drawing of bright steel. The undiluted product is usually used as a dip or applied by brushes or felt rollers.

• Stable load-bearing capacity and homogeneous sliding properties
• Reliably reduces friction and wear and thus contributes to long tool life
• Excellent wetting and film formation without sticking
• Stable cold start behaviour, prevents stick-slip effect and chattering
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Can be removed with solvent-based or alkaline cleaners

WEDOLIT is a highly viscous, water-insoluble lubricant for tube drawing and other cold forming processes of aluminium and non-ferrous metals. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Evaporates at temperatures T ≥ 300°C without leaving any residues or stains on the metal surface. Therefore, no preliminary degreasing is necessary before a potential soft annealing

WEDOLiT FN 1571-2800 is a highly viscous, water-insoluble lubricant for tube drawing and other cold forming processes of aluminium and non-ferrous metals. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Evaporates at temperatures T ≥ 300°C without leaving any residues or stains on the metal surface. Therefore, no preliminary degreasing is necessary before a potential soft annealing

WEDOLiT FN 1850-9 is a mineral-oil based, chlorine containing, high performance lubricant for cold forming operations of steel and stainless steel (e.g. tube drawing of very small diameter tubes). The undiluted product can be applied by spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 1872-50 is a water-insoluble, reactive drawing oil, based on special phosphoric acid esters, which creates an iron phosphate layer on iron and steel parts. The product is free of chlorine, sulphur or nitrites.

• The product is used in a heated bath with a temperature of T_Bath = 60°C ± 5°C
• After 10 - 15 min, a sufficient film should have been developed on the tube surface (residues of lime- or carbon deposits must be removed preliminary)
• It is important to keep the water content in the product at a value of 1 - 1.7%, to form uniform phosphate layers on the tube surface
• The product offers a short-term corrosion protection (max. a few days)
• The pipes can be cleaned after drawing with alkaline cleaners, solvents or bright annealing

WEDOLiT FN 1940-60 is a medium viscous, water-insoluble lubricant for tube drawing and other cold forming operations of steel, aluminium and non-ferrous metals. The undiluted product can be applied by spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 2451-150 is a medium viscous, water-insoluble lubricant for wire drawing and other cold forming processes, e.g. deep drawing, extrusion or thread forming, of steel, stainless steel and aluminium. The undiluted product is usually applied by brushes or rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a long tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 2451-180 is a medium viscous, water-insoluble lubricant for wire drawing and other cold forming operations, e.g. deep drawing, extrusion or thread forming, of steel, stainless steel and aluminium. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 2451-850 is a highly viscous, water-insoluble lubricant for wire drawing and other cold forming processes, e.g. deep drawing, extrusion or thread forming, of steel, stainless steel and aluminium. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 2551-1800 is a highly viscous, water-insoluble lubricant for wire drawing and other cold forming processes, e.g. deep drawing, extrusion or thread forming, of steel, stainless steel and aluminium. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 4170-35 is a low viscous, water-insoluble chlorinated lubricant for heavy forming operations of steel and stainless steel. A combination of EP additives offers an outstanding performance for precision cutting operations. The undiluted product is usually applied by spraying, dipping, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 4455-25 is a low viscous, water-insoluble lubricant for medium to heavy forming operations of steel and non-ferrous metals. A combination of EP additives offers a outstanding performance for precision cutting operations. The undiluted product is usually applied by spraying, dipping, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 4455-55 is a low viscous, water-insoluble lubricant for heavy forming operations of steel and non-ferrous metals. A combination of EP additives offers a outstanding performance for precision cutting operations. The undiluted product is usually applied by spraying, dipping, brushing or rolling.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a long tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 6160-90 is a water-insoluble, chlorinated lubricant for deep drawing and other cold forming operations, e.g. wire drawing, extrusion or thread forming of steel and stainless steel. The undiluted product is usually applied by flooding, spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 6870-170 is a medium viscous, water-insoluble lubricant for deep drawing and other cold forming processes of steel (e.g. for auto bodies). Additionally, the product is suitable as a spot lubricant for thread cutting or blind hole drilling. The undiluted product is usually applied by spraying, dipping, brushes or by means of rollers.

The product meets the requirements of the test procedure according to VDA 230-213.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 6870-38 is a water-insoluble lubricant for wire drawing and other cold forming operations, e.g. deep drawing, extrusion or thread forming, of steel and stainless steel. The undiluted product is usually applied by flooding, spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 6870-440 is a high-performance product, which is based on highly refined mineral oils. The product is suitable for heavy forming and machining operations of steel, stainless steel and aluminium (e.g. thread cutting, stamping or deep drawing).

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieve dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FN 8830 is a chlorine free, pasty, water-insoluble lubricant for cold forming processes (e.g. pilgering) of high alloyed steels. The product is usually applied on the outer diameter by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• The outstanding extreme-pressure properties combined with an exceptional adhesion offers the possibility for high degrees of deformation
• Stable cold start behaviour, prevents stick-slip and chatter
• Contributes to achieving dimensional accuracy
• Pigments will remain on the surface after annealing and need to be removed (e.g. by pickling with HCl or HNO₃) before further processing

WEDOLiT FN 8850-90 is a medium viscous, water-insoluble lubricant for tube drawing and other cold forming operations of steel. Due to the fact that the product also offers corrosion protection, no additional treatment is necessary (for short term storage). The undiluted product is usually applied by spraying, brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behaviour
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behaviour, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FW 6550-165 is a synthetic, mineral oil and chlorine-free, highly additivated punching and forming medium. The EP additives ensure a pressure-resistant lubricating film, even in difficult machining processes.

• Suitable for deep-drawing, extrusion, punching and cutting processes not only on steels, but also on stainless steels
• Undiluted by brush or felt roller and can be easily washed off with water
• Does not contain any insoluble pigments such as graphite or molybdenum disulfide

WEDLiT N 22-3 is a thixotropic, non water soluble, deep drawing agent, which was developed for cold forming of coated carbon steels. It is especially applicable for electro galvanised zinc-, zinc nickel coated- and aluminised-sheets. Also good for aluminium and aluminium alloys. The product can be applied by spraying, flooding or rolling.

Fulfils the requirements of all German automotive manufacturers according to VDA-213 and VW-A001, and has been approved by all VDA members.

• Applications at ambient temperatures possible
• A preheating of the oil to approximately 40 - 50°C is possible without the loss of the thixotropic effect after cooling
• Acts at the same time as a corrosion protection agent, and therefore a post treatment of the drawn sheets is not necessary
• An agent stable film is formed after drawing
• Can be removed with organic solvents or water soluble, mild alkaline industrial cleaning agents, even after long storage periods
• After grease removal, excellent phosphating is possible