Fluid Products / Medical

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the needs of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C385 is a state-of-the-art synthetic coolant which provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness. C385 meets the need of the modern job shop for a single premium synthetic coolant for honing and virtually all machining operations.

• Very low foam and mist
• Great for form grinding, honing, boring, rolling, etc
• Exceptional sump life and very good tramp oil rejection
• Extremely low carry-off for very low total operating costs
• Very low initial odor which usually disappears after 1-2 days
• Compatible with dirty or grey cast iron cutting, grinding, and honing
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
• The residual film is easily resoluble in the coolant working solution to facilitate easy machine cleaning and to minimize the buildup of sticky residues that can hold machine-destroying chips

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Very wide application range, suitable for both grinding and machining
• Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
• In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with aluminum, steel alloys, cast iron, and yellow metals
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Does not contain or test positive for phenol
• Will run effectively for long periods without the need for costly additives

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides good operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Good hard water tolerance
• Works very well in general machining where traditional soluble oil may not cool sufficiently.
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut
• Good balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with most aluminum, steel, cast iron and brass material
• High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Good cleaning performance keeps machine tools clean
• Easy recycling or disposal by using conventional techniques and equipment

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odor. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminum alloys, inconel, titanium, stainless, and high tensile strength steels.

• Delivers unparalleled lubricity
• Very long sump life and low carry-off rates result in low operating cost
• Low foam even in soft water areas
• Hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
• Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the workpiece and chips for superior tool life and corrosion prevention
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel^®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

U.S. Patent 11,396,708

• Exceptional performance on hard aerospace metals
• Superior lubricity for machining softer aluminum alloys
• Trouble-free production
• Safest, environmentally-friendly ingredients
• Long-running lifespan delivers high customer value
• Less scrap, low foam, and low odor

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Compatible with cobalt alloys
• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT bd is a blue dye, high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT bd!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM OM 222 is a high-performance, light color, straight cutting oil which reduces the formation of built-up edge in cutting hard-to-machine materials. TRIM OM 222 has a balanced extreme-pressure package for excellent finishes and tool life on variety of metals.

• Excellent lubricity for efficient metal removal
• Light color and low odor for good operator acceptance
• Suitable for machining difficult ferrous and stainless steel alloys
• High-quality raw materials resist oxidation
• Lower viscosity allows better cooling
• Safe for use on nonferrous as well as ferrous metals
• OM 222 is excellent for use in screw machines and bar-fed, multi-station machines
• The multi-metal compatibility of OM 222 makes it an excellent choice where a shop is working with a wide variety of materials

TRIM TAP HEAVY is a 100% synthetic and vegetable-based lubricant possessing strong friction-reducing properties. Designed as a tough operation product for use with metals of low machinability, it's recommended for use at full-strength, brush-on use for reaming, tapping, and threading.

• Especially for taps ½" diameter and larger
• Contains no mineral oils
• Promotes excellent finish
• Ensures parts size control
• Delivers exceptionally long tool life
• Reduces rubbing of the tool flank
• Water washable, for easy parts cleaning
• Compatible with most TRIM fluids
• Use for added lubricity on extremely tough jobs

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

• Very economical way to remove heavy soils and light rust
• Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
• Can be recycled using XYBEX equipment
• Contains no solvents, borates, silicates, nitrites, or amines
• Long bath life
• Excellent compatibility with magnesium
• Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

• An excellent cleaner and very economical to use
• Compatible with aluminum, cast iron, and steel alloys
• Rejects oil for easy skimming or centrifuging to extend bath life
• Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
• Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws many years of hands-on experience in machine clean outs
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws on many years of hands-on experience in machine cleanouts
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways