Fluid Products / General Industry

TRIM E720 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to heavy duty machining jobs on aluminium and stainless steel. The inhibitor package in TRIM E720 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

• Very stable formula provides long operational life with consistent performance
• Hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Will run effectively for long periods without the need for costly additives

TRIM E806 is a truly unique metalworking fluid emulsion concentrate with unparalleled metal compatibility and all round machining performance characteristics. The product is primarily designed for machining magnesium alloys used in the aerospace, automotive and general industry sectors. TRIM E806 does not tarnish the most sensitive magnesium alloys even after relatively long exposure times plus it is impervious to magnesium salt build-up in the sump - something which splits normal emulsions in a matter of days. Another problem with magnesium machining, hydrogen gas evolution, is virtually nil with TRIM E806. The product also has the lubricity and extreme pressure performance to machine other alloys commonly seen in the aerospace industry such as wrought aluminiums, stainless steels, inconel^® and titanium.

• Safe for use on even the most sensitive magnesium alloys
• Little or no hydrogen gas evolution when machining magnesium
• Bio package extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications

TRIM E905 is a high quality, high lubricity universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. TRIM E905 has broad application in machining and grinding of a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of TRIM E905 makes it a first choice for high quality, consistent parts manufacturing.

• A very universal product that works well in a wide range of operations
• Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
• Extremely hard water tolerant
• Very low foam even at high pressures
• Extremely fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easily recycled or disposed of without special handling or equipment

TRIM E909 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. Very high levels of extreme pressure additives in this product make it particularly suitable for the heavy duty machining jobs on stainless steel and other difficult to machine alloys. The inhibitor package in TRIM E909 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

• Very stable formula provides long operational life with consistent performance
• Hard water tolerant
• Traditional extreme pressure (EP) additives control built-up edge (BUE)
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Will run effectively for long periods without the need for costly additives

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminium alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 530 is an environmentally-friendly semisynthetic, microemulsion coolant formulated especially for the machining of aluminium alloys. It utilises the newest technology to provide long-life and excellent protection of sensitive alloys. The outstanding lubrication properties of MicroSol 530 provide surface finish levels on aluminium components normally only seen with very high oil containing milky emulsions. Unlike those emulsions, MicroSol 530 is very clean running and keeps machine tools clear of unsightly residue build-up as well as reducing concentrate consumption.

• Lubrication package gives excellent performance for aluminium machining
• Excellent choice for aluminium alloy wheel machining applications
• Optimised combination of cooling and lubricity for aluminium, titanium, steel, stainless steel, and Inconel^® machining applications
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to milky soluble oils on aluminium alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and coolant carry-off

TRIM OE105 is an ester based neat grinding oil formulated for fine grinding and superfinishing. TRIM OE105 imparts excellent lubricity whilst keeping grinding wheels and stones extremely clean. This ensures fantastic surface finishes on hardened steel alloys, stainless steels and non-ferrous materials

• Excellent extreme-pressure additive package for efficient metal removal
• Very high lubricity
• Great detergency
• Fully saturated ester ensures unsurpassed oxidation stability
• Ester based formulation ensures very low misting potential
• Very high flash point for such a low viscosity product
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE209 is a medium to heavy-duty neat cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximise tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

• Extremely high lubricity ensures fantastic tool life
• Excellent detergency keeps grinding wheels clean
• Does not leach cobalt from carbide tool alloys
• Chlorine and sulphur free
• Readily biodegradable
• Saturated ester based formulation ensures very low foam and misting
• Very High flash point
• Unsurpassed oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE315 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Low viscosity ensures excellent chip removal in deep-hole drilling
• Ester based formulation ensures very low misting potential
• Very high flash point
• Good oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE322 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Extremely low misting potential even with high-pressure chip-breaker units
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE335 is a heavy-duty neat cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximise tool life in operations such as gear hobbing.

• Extremely high lubricity ensures fantastic tool life
• Readily biodegradable
• Ester-based formulation ensures very low misting potential
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent friction reducing properties ensures long wheel life
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light colour and low odour for good operator acceptance

TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent lubricity and EP properties ensures long wheel life and good surface finish
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light colour and low odour for good operator acceptance

TRIM SC440SW is a very low foam, semisynthetic coolant specifically formulated for machining and grinding of cast iron and steel in soft water. This unique formulation ensures low levels of foam not generally seen with other semisynthetic products. SC440SW's clean running formulation also prevents the loading of grinding wheels, ensuring good surface finishes and minimal burning.

• No aggressive biocides
• Low foaming even in soft water
• Excellent rust protection to prevent clinkering of cast iron chips
• Keeps the machine and work environment clean even when machining or grinding grey iron
• Fine micro-emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and keep grinding wheels clean
• Easily recycled or disposed of without special handling or equipment

TRIM™ SOL SF is a very high lubricity soluble oil which is suitable for machining and grinding a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining of difficult materials such as stainless steel, Inconel^® and titanium.

• A very universal product that works well in a wide range of operations
• Compatible with aluminium, all steels and yellow metals
• Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
• Hard water tolerant
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Siloxane free
• Easily recycled or disposed of without special handling or equipment

Master STAGES NOCOR S2 is a synthetic, water soluble, ferrous corrosion inhibitor for short-term storage or shipment. Effective at concentrations from 3% - 10% in water, it provides a very thin, water soluble protective film.

• The transparent film left by NOCOR S2 is easily removed and will not interfere with additional machining, gauging, or assembly steps
• Barium-free and contains very low levels of volatile organic compounds as applied