Fluid Products / General Industry

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminum alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Low foaming for modern high-pressure, high-volume applications
• Uses standard metalworking recycling and disposal techniques
• Does not contain any chemical listed under Japan PRTR regulation
• Provides superior corrosion inhibition on all ferrous metals

TRIM MicroSol 687NXT bd is a clear blue, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Low foaming for modern high-pressure, high-volume applications
• Uses standard metalworking recycling and disposal techniques
• Does not contain any chemical listed under Japan PRTR regulation
• Provides superior corrosion inhibition on all ferrous metals

TRIM OG205 is a very-high-specification grinding and honing oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined mineral oil with low aromatic content, which ensures very low levels of mist and high flash point. TRIM OG205 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• No reaction with cobalt
• Very highly refined base oil ensures low mist and high flash point
• Can be used for light duty universal machining operations
• Good flushing properties keeps grinding wheels very clean
• Excellent friction reducing properties ensures long wheel life
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• Kind to machine components and elastomers
• Light color and low odor for good operator acceptance

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM OM350C is a heavy duty, mineral oil based cutting oil formulated with high performance synthetic ester-based additives. It can be used for a variety of metal cutting and grinding processing, especially suitable for steel broaching. This product is also suitable for tapping, milling, and reaming processes. Also suitable for multi metal applications such as copper alloy, aluminum alloy, and heat-treated steel.

• Excellent extreme pressure lubrication, inhibiting BUE generated, providing an excellent surface finish
• Provides excellent lubrication and cooling for machining deep holes
• Low oil mist, low volatility, maintains a clean working environment

TRIM SC538AL is a high-performance semisynthetic fluid that provides excellent boundary lubrication characteristics for aluminum alloy machining. Suitable for general cutting of ferrous and non-ferrous metal materials, TRIM SC538AL achieves very satisfactory surface finishes and is widely used in the automotive and general machining industry. TRIM SC538AL complies with environmental protection and safety laws and regulations for automotive metalworking fluids, as well as the relevant element restrictions in Europe, USA, and Japan.

• Excellent cooling and lubrication properties, provides ultra-fine surface finish for aluminum alloy machining
• Provides excellent anti-corrosion protection for non-ferrous metals such as aluminum while avoiding corrosion and discoloration of the workpiece
• Suitable for stainless steel, aluminum alloys, and other non-ferrous and ferrous metals
• Excellent anti-foaming performance
• No sticky residue on the surface of the work piece
• Coolant residues are easily removed with water, working fluid, or water-based cleaning agents
• Good cleaning performance keeps the machines very clean
• Easy recycling and disposal with conventional techniques and equipment
• Provides excellent safety, reducing the risk of allergies for workers
• Meets the requirements of customers with high compliance requirements for metalworking fluids.

TRIM SC639 is a general purpose semisynthetic cutting and grinding fluid concentrate which provides an excellent balance between cooling and lubricity. SC639 has very good corrosion protection for both ferrous and non-ferrous metal, and can be used for a wide range of high-speed turning and grinding operations. SC639 leaves a thin layer of water soluble oil residue that provides extra protection to the machine tools parts while keeping the machine clean.

• Provides excellent lubricity for various machining applications
• Provides excellent corrosion and rust inhibition on ferrous and nonferrous alloys, preventing clinkering problems of cast iron chips in machining
• Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
• Long sump life and low coolant consumption that reduce the cost for user
• Low odor and mist that provides a good working environment
• Good hard water tolerance up to 40 grain
• Easy recycling or disposal with conventional techniques and equipment

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

• Very economical way to remove heavy soils and light rust
• Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
• Can be recycled using XYBEX equipment
• Contains no solvents, borates, silicates, nitrites, or amines
• Long bath life
• Excellent compatibility with magnesium
• Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed