Fluid Products / Automotive

TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after one-to-two days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor which usually disappears after one to two days

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

• Very low foam and mist
• Provides excellent corrosion inhibition on all common ferrous alloys
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
• Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
• Extremely low carryoff for very low total operation costs
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odor which dissipates further after one or two days
• Minimizes the buildup of sticky residues

TRIM E206KS is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E206KS makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Extremely hard water tolerance
• Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
• Provides good tool life and surface finishes
• High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Coolant residue is easily removed with either water, working solution or aqueous cleaners
• Good cleaning performance keeps machine tool very clean
• Easy recycling or disposal with conventional techniques and equipment
• Run effectively for long periods without the need for costly additives

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Very wide application range, suitable for both grinding and machining
• Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
• In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with aluminum, steel alloys, cast iron, and yellow metals
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Does not contain or test positive for phenol
• Will run effectively for long periods without the need for costly additives

TRIM E709FF is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E709FF makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Extremely hard water tolerance
• Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
• Provides good tool life and surface finishes
• High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Coolant residue is easily removed with either water, working solution or aqueous cleaners
• Good cleaning performance keeps machine tool very clean
• Easy recycling or disposal with conventional techniques and equipment
• Run effectively for long periods without the need for costly additives

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides good operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Good hard water tolerance
• Works very well in general machining where traditional soluble oil may not cool sufficiently.
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut
• Good balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with most aluminum, steel, cast iron and brass material
• High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Good cleaning performance keeps machine tools clean
• Easy recycling or disposal by using conventional techniques and equipment

TRIM E711 is a high quality soluble oil designed primarily for the machining and grinding of yellow metals and copper alloys.

• Rejects tramp oil to extend sump life
• Will not stain or darken brass or other yellow metal alloys
• Easy recycling or disposal with conventional techniques and equipment
• Coolant is easily removed with water, working solution or aqueous cleaners
• Very stable formula provides long operational life with consistent performance
• Will not form the sticky, water insoluble residues commonly seen when machining yellow metals
• Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Compatible with all ferrous and nonferrous materials but is specifically designed for "free machining" yellow metals
• Provides sufficient mechanical lubricity to run well in older "Swiss" style machines as well as in modern high speed CNC machines

TRIM™ E712 is high quality universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protection film on the work piece and machine parts to prevent corrosion on metal surface including the machine tool. The stable and predictable performance of TRIM E712 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Very wide application range. Suitable for both grinding and machining
• Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
• In high-speed turning and milling, provides good tool life and surface finishes
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Coolant is easily removed with water, working solution or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives. Easily recyclable and/or dispose with conventional recycling and/or disposal techniques

TRIM E715 is a high quality, universal, soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs very well. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Non-chlorinated and non-sulphurized extreme pressure (EP) additives control built-up edge (BUE)
• Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron, and yellow metals
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E860KS is a high quality, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS makes it a first choice for high quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Very wide application range
• Suitable for both grinding and machining
• Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
• In high-speed turning and milling, provides good tool life and surface finishes
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives
• Works very well in general machining where traditional soluble oil may not cool sufficiently

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

• Delivers unparalleled lubricity
• Very long sump life and low carry-off rates result in low operating cost
• Low foam even in soft water areas
• Hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
• Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminium alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT bd is a blue dye, high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT bd!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM OGM100HF is a high-efficiency grinding oil composed of high-quality mineral oil and various high-quality oil additives. This product has good permeability and lubricity, and can be used in the grinding process of materials (especially gear grinding) like cast iron, alloy steel, stainless steel, etc. It is also suitable for various profile grinding, internal and external grinding, cutting, centerless grinding, and other grinding processes.

• Does not contain phosphorus or heavy metals, which protects the environment and reduces pollution
• Light color, low odor
• Good material compatibility
• Safe and non-irritating to the skin
• Produces good surface finishes
• Provides high-strength lubricity in various medium-to-heavy-duty machining operations
• Meets the cutting requirements of various machining operations: such as, automatic lathes, special machines, CNC lathes, and machining centers.

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM OM 222 is a high-performance, light color, straight cutting oil which reduces the formation of built-up edge in cutting hard-to-machine materials. TRIM OM 222 has a balanced extreme-pressure package for excellent finishes and tool life on variety of metals.

• Excellent lubricity for efficient metal removal
• Light color and low odor for good operator acceptance
• Suitable for machining difficult ferrous and stainless steel alloys
• High-quality raw materials resist oxidation
• Lower viscosity allows better cooling
• Safe for use on nonferrous as well as ferrous metals
• OM 222 is excellent for use in screw machines and bar-fed, multi-station machines
• The multi-metal compatibility of OM 222 makes it an excellent choice where a shop is working with a wide variety of materials

TRIM OM350C is a heavy duty, mineral oil based cutting oil formulated with high performance synthetic ester-based additives. It can be used for a variety of metal cutting and grinding processing, especially suitable for steel broaching. This product is also suitable for tapping, milling, and reaming processes. Also suitable for multi metal applications such as copper alloy, aluminum alloy, and heat-treated steel.

• Excellent extreme pressure lubrication, inhibiting BUE generated, providing an excellent surface finish
• Provides excellent lubrication and cooling for machining deep holes
• Low oil mist, low volatility, maintains a clean working environment

TRIM OM 360 is a high quality mineral oil containing an effective synthetical ester additive. It is designed for cutting and grinding a wide range of materials, and especially for steel broaching. This product can also be used for tapping, gear milling, or reaming. It is also suitable for aluminum alloy machining and steel heat treatment.

• Excellent EP lubricating performance, good built up edge control (B.U.E.), provides super surface finish
• Provides outstanding lubricating and cooling necessary for deep hole machining
• Low mist and volatilization, keep working environment clean

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

5 drum^∗ minimum batch order size. Pricing and delivery available upon request.

TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

• Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
• Low foaming in most operations
• Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
• Will provide superior sump life and corrosion inhibition for long periods of time without adds
• Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron
• Will keep the machine and work environment clean even when machining or grinding gray iron
• Contains no chlorine or sulfur-based additives
• Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
• Very low carryoff and long sump life, delivering low operating costs
• Hard water tolerant up to 30 grains

TRIM SC538 a high-performance semisynthetic coolant. Provides superior aluminum machinability, boundary lubrication, and produces a very high quality surface finish. Can also be utilized for ferrous and non-ferrous metal materials, stainless steel, and aerospace alloy materials. SC538 has good lubricity and friction reducing qualities in high-speed cutting and grinding applications.

• Provides superior aluminum machinability
• Very high quality surface finish
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Low odor and mist makes for an operator friendly product
• Easy recycling and disposal with conventional techniques and equipment

TRIM SC538AL is a high-performance semisynthetic fluid that provides excellent boundary lubrication characteristics for aluminum alloy machining. Suitable for general cutting of ferrous and non-ferrous metal materials, TRIM SC538AL achieves very satisfactory surface finishes and is widely used in the automotive and general machining industry. TRIM SC538AL complies with environmental protection and safety laws and regulations for automotive metalworking fluids, as well as the relevant element restrictions in Europe, USA, and Japan.

• Excellent cooling and lubrication properties, provides ultra-fine surface finish for aluminum alloy machining
• Provides excellent anti-corrosion protection for non-ferrous metals such as aluminum while avoiding corrosion and discoloration of the workpiece
• Suitable for stainless steel, aluminum alloys, and other non-ferrous and ferrous metals
• Excellent anti-foaming performance
• No sticky residue on the surface of the work piece
• Coolant residues are easily removed with water, working fluid, or water-based cleaning agents
• Good cleaning performance keeps the machines very clean
• Easy recycling and disposal with conventional techniques and equipment
• Provides excellent safety, reducing the risk of allergies for workers
• Meets the requirements of customers with high compliance requirements for metalworking fluids.

TRIM SC686 is a semisynthetic coolant and is well suited for general high-speed machining and grinding of all materials. TRIM SC686 combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil.

• Extremely effective EP additive package
• Low odor and mist makes for an operator-friendly product
• Easy recycling or disposal with conventional techniques and equipment
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

TRIM SC686 is a blue dye semisynthetic coolant and is well suited for general high-speed machining and grinding of all materials. TRIM SC686 combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil.

• Extremely effective EP additive package
• Low odor and mist makes for an operator-friendly product
• Easy recycling or disposal with conventional techniques and equipment
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

TRIM TC 155 is a nonferrous corrosion inhibitor for use in water soluble and straight oil systems. It is particularly effective in preventing staining and white rust on die cast alloys containing copper.

• Prevents staining and white rust on die cast alloys containing copper
• Nonferrous corrosion inhibition

TRIM TC 175 is a chlorinated EP (extreme pressure) lubrication/emulsifier additive package. It may be added to water-soluble coolant systems to replace or increase the presence of the chlorine EP additives in the system.

• New, easier to mix formulation
• New, chlorine EP additives stay in systems longer

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

• Very economical way to remove heavy soils and light rust
• Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
• Can be recycled using XYBEX equipment
• Contains no solvents, borates, silicates, nitrites, or amines
• Long bath life
• Excellent compatibility with magnesium
• Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

• Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
• An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
• Hard water tolerant, it provides long bath life
• Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
• This formula has very low V.O.C. content and no SARA 313 reportable ingredients
• Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Master STAGES™ CLEAN 2039 is a concentrated, very high performance cleaner made for washing all metals including cast iron and alloy steels. CLEAN 2039 can be used in spray-type and ultrasonic cleaning of light oils. CLEAN 2039 cleans the oil and metal residues off of the parts, while leaving a thin protective film to provide strong corrosion inhibition on ferrous metals. It is a good choice for cleaning cast iron parts.

• Provides strong corrosion inhibition
• To extend CLEAN 2039's wash bath life, it is very easy to remove tramp oils by using the XYBEX SCROUNGER™ or SCROUNGER™ JR Oil Skimmers
• Low foam even in the high-pressure washers

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

• Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
• Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
• Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
• Provides short-term corrosion inhibition on cast iron and ferrous alloys
• Excellent biostability
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level
• Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 9640AL is a super-concentrated water-soluble cleaning fluid for cleaning aluminum alloy, alloy steel, stainless steel, cast iron, and other metal parts. With excellent anti-foam and tramp oil rejection characteristics, long-life, CLEAN 9640AL is especially recommended for low- to medium-pressure spray cleaning and is most suitable for single-chamber spray cleaning machines.

• Low foaming
• Strong ability to resist oil
• Use a SCROUNGER™ or a SCROUNGER™ JR to extend the useful life of CLEAN 9640AL
• Good rust inhibition
• Excellent biostability
• Extremely low carryoff for very low total operation costs
• Very low foam and mist

Master STAGES™ CLEAN 9640XT is a concentrated, very high performance cleaner made for washing all ferrous metals including cast iron, alloy steel and other metal parts cleaning, and provide a strong rust –proof function between processes. CLEAN 9640XT can be used in spray-type cleaning and ultrasonic cleaning of light oil. It can clean the oil and metal liquid residue of the parts, and leave a thin layer of protective film which provides the rust-proof of ferrous metal. CLEAN 9640XT has good anti-rust and anti-corrosion. It is a good choice for cleaning cast iron parts.

• Very good rust prevention, fits to high requirement rust cleaning processes
• Strong ability to resist oil
• It is very easy to separate out oil by using SCROUNGER & SCROUNGER JR to extend the service life
• In the usual heating conditions, CLEAN 9640XT can keep a low foam even in a high pressure washer

Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

• An excellent cleaner and very economical to use
• Compatible with aluminum, cast iron, and steel alloys
• Rejects oil for easy skimming or centrifuging to extend bath life
• Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
• Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws many years of hands-on experience in machine clean outs
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws on many years of hands-on experience in machine cleanouts
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways