Specialty Fluids

WEDOLiT EP 1090-E is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents the stick-slip- effect due to the high content of polar additives.

• Very high film stability (even under high pressures)
• Good adhesion properties on smooth surfaces, very good wear protection
• Easily removable with water (spontaneous emulsification)
• The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be easily separated into water and oily waste by the utilization of specific additives
• The treated water can be reused for the preparation of a new emulsion (to a certain degree)

WEDOLiT EP 435 E is a highly viscous, high-performance forming oil based on renewable raw materials. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents, due to the high content of polar additives, the stick-slip-effect.

• Very high film stability (even under high pressures)
• Good adhesion properties on smooth surfaces, very good wear protection
• Easily removable with water (spontaneous emulsification)
• The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be separated into water and oily waste by the utilization of specific additives
• The treated water can be reused for the preparation of a new emulsion (to a certain degree)

WEDOLiT EP 540 ES is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and due to the high content of polar additives, prevents the stick-slip-effect.

• Very high film stability (even under high pressures)
• Good adhesion properties on smooth surfaces, very good wear protection
• Easily removable with water (spontaneous emulsification)
• The emulsion can be used for pre- and post-cleaning of the pipes and expander heads and can be easily separated into water and oily waste by utilizing specific additives
• Due to the unique easy-splitting-technology, only a very small amount of the splitting media is needed
• The treated water can be reused for the preparation of a new emulsion (to a certain degree)

WEDOLiT EP 760 E is a highly viscous, high-performance forming oil based on renewable raw materials. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents, due to the high content of polar additives, the stick-slip-effect.

• Very high film stability (even under high pressures)
• Good adhesion properties on smooth surfaces, very good wear protection
• Easily removable with water (spontaneous emulsification)
• The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be separated into water and oily waste by the utilization of specific additives
• The treated water can be reused for the preparation of a new emulsion (to a certain degree)

WEDLiT N 22-3 is a thixotropic, non water soluble, deep drawing agent, which was developed for cold forming of coated carbon steels. It is especially applicable for electro galvanized zinc-, zinc nickel coated-, and aluminized-sheets. Also good for aluminum and aluminum alloys. The product can be applied by spraying, flooding, or rolling.

Fulfills the requirements of all German automotive manufacturers according to VDA-213 and VW-A001, and has been approved by all VDA members.

• Applications at ambient temperatures possible
• A preheating of the oil to approximately 104 - 122°F, (40 - 50°C) is possible without the loss of the thixotropic effect after cooling
• Acts at the same time as a corrosion protection agent, and therefore a post treatment of the drawn sheets is not necessary
• An agent stable film is formed after drawing
• Can be removed with organic solvents or water soluble, mild alkaline industrial cleaning agents, even after long storage periods
• After grease removal, excellent phosphating is possible