Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support

All Products For Region

TRIM

TRIM® 229

Corrosion-inhibiting Synthetic

TRIM 229 is a synthetic coolant that delivers maximum chemical corrosion inhibition on ferrous materials with no residual film at the lowest possible cost. TRIM 229 is often used in surface grinding where maximum cooling and minimum foam are desirable. TRIM 229 is also used in other situations including: water tables on plasma torches, leak detection dip tanks, abrasive cut-off machines, and water-jet cutting systems.

  • Highly concentrated for very low-cost working solutions
  • Keeps grinding wheels clean and the work piece cool
  • Rapidly settles fines
  • Nonfoaming
  • Low mist
  • Low odor
  • Very low residue for easy cleaning
  • Provides good corrosion inhibition on all common ferrous materials
  • Rejects tramp oil for easy skimming and cleaning
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® 9106

    Synthetic

    TRIM 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. Recommended for grinding operations on cast iron, aluminum, and steels. Will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. Contains no sulfur, phosphorus, chlorine, or other halogens.

  • Low mist
  • Low foam
  • Moderate pH
  • Very low odor
  • Clear working solution
  • Very operator, machine, and environmentally friendly
  • Will not form ammonia or other gases when grinding or machining cast iron
  • Inhibits chip packing and clinkering
  • Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Very low carryoff for extremely low fluid operating costs
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® C118

    Synthetic Metalworking Fluid

    TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one to two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

  • TRIM® C270

    High-performance Synthetic

    TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

  • TRIM® C270 bd

    High-performance Synthetic - Blue Dye

    TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

  • TRIM® C270CG

    High-performance Synthetic

    TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

  • TRIM® C270CG bd

    High-performance Synthetic - Blue Dye

    TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

  • TRIM® C276

    Clean-running Synthetic

    TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odor which dissipates further after one or two days
  • Minimizes the buildup of sticky residues

  • TRIM® C290

    Economical Synthetic Fluid for Aluminum Machining

    TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

  • Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
  • Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
  • Provides good results in a wide range of grinding and machining operations
  • Excellent tramp oil rejection
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

  • TRIM® C320

    High-lubricity Synthetic

    TRIM C320 is a high-lubricity, low-foam, synthetic coolant that approaches the "down-the-hole" machining performance of premium soluble oils. This product is exceptionally good on aluminum. Even with its very high performance, C320 meets or exceeds most stringent environmental standards.

  • Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives
  • A very versatile product which works well in mixed-metal situations
  • Provides good corrosion inhibition on all common ferrous and nonferrous alloys
  • Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal
  • Operators like C320's very low odor, low foam, low mist, and light yellow working solution
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Exceptional sump life, great resistance to fungus and bacteria, and good tramp oil rejection
  • C320 is a super product for aluminum wheel machining

  • TRIM® C350

    Premium Synthetic Metalworking Fluid

    TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

  • TRIM® C390

    High Performance Aerospace Synthetic

    TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

  • TRIM® E206

    Long-life Emulsion

    TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® E206 nd

    Long-life Emulsion - No Dye

    TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® E715

    Multi-metal Machining Emulsion

    TRIM E715 is a high quality, universal, soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs very well. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Non-chlorinated and non-sulphurized extreme pressure (EP) additives control built-up edge (BUE)
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron, and yellow metals
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E860

    Low-foam, High-lubricity Emulsion

    TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

  • TRIM® E923

    Chlorine-free, Extreme-lubricity Emulsion

    TRIM E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine-free extreme-pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations while still providing the excellent non-cutting characteristics normally associated with traditional, high-quality emulsions from Master Fluid Solutions. The extreme lubricity and extreme pressure package matches heavy-duty neat oils on difficult-to-machine materials such as Inconel®, titanium, stainless steel, and high tensile strength steels.

  • Delivers exceptional lubricity and EP performance
  • Has the necessary performance to replace neat oils in certain applications
  • Very long sump life
  • Low foam even in soft water areas
  • Hard water tolerant
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E925

    Chlorine-free, High-performance Emulsion

    TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

  • TRIM® E925AE

    DCHA-free, High-performance Emulsion

    TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

  • DCHA free
  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

  • TRIM® HD

    Synthetic Stamping Fluid

    TRIM HD is a synthetic stamping fluid for light-to-moderate duty stamping, drawing, and forming and can also be used for general machining and grinding of ferrous materials. It utilizes a proprietary blend of heavy-duty boundary and extreme pressure lubricity agents for improved performance on stainless steel, super alloy, and most soft aluminum.

  • Lubrication package protects machines and extends the life of the die
  • Provides rapid and effective cooling and reduces machining forces through the use of EP additives and boundary lubricants
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with all ferrous and most nonferrous materials
  • Broad range of applications by using different concentrations for different applications
  • Fully compatible with most nonmetallic materials
  • A superior product for low-speed, high-pressure operations such as production band sawing and drilling
  • Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools

  • TRIM® HyperSol™ 888NXT

    neo-synthetic precision aerospace machining fluid

    Experience ultimate versatility
    HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
    See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

    U.S. Patent 11,396,708

  • exceptional performance on hard aerospace metals
  • superior lubricity for machining softer aluminum alloys
  • trouble-free production
  • safest, environmentally-friendly ingredients
  • long-running lifespan delivers high customer value
  • less scrap, low foam and low odor

  • TRIM® MicroSol® 455

    Low-foam Ferrous Semisynthetic

    TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

    Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminum alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

  • TRIM® MicroSol® 465

    Low-foam Semisynthetic

    TRIM MicroSol 465 low-foam semisynthetic microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 465 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

    Delivering extended sump life, machine-friendly MicroSol 465 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 465.

  • Easy to maintain and hard water stable
  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminum alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

  • TRIM® MicroSol® 485

    Long-life Ferrous Semisynthetic

    TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 555

    High-lubricity, Semisynthetic Metalworking Fluid

    TRIM MicroSol 555 is a high-lubricity, semisynthetic microemulsion coolant optimized for high-volume production environments. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Has exceptional sump life without the use of tank-side additives
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard-water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 585XT

    Extended-life, Nonchlorinated Semisynthetic

    TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 590XT

    Advanced Technology Aerospace Semisynthetic

    TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

  • TRIM® MicroSol® 606

    Long-life Microemulsion

    TRIM MicroSol 606 is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

  • TRIM® MicroSol® 606 bd

    Long-life Microemulsion - Blue Dye

    TRIM MicroSol 606 bd is a blue dyed, microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

  • TRIM® MicroSol® 642RX

    High-lubricity, Low-foam, Medical Grade Microemulsion

    TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

  • TRIM® MicroSol® 685

    High-lubricity Semisynthetic Metalworking Fluid

    TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

  • TRIM® MicroSol® 685lf

    High-lubricity, Low-foam Semisynthetic

    TRIM MicroSol 685lf is a high-lubricity, low-foaming, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Exceptional form inhibition in both soft and hard water environments
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

  • TRIM® MicroSol® 685XT

    High-lubricity, Low-foam Semisynthetic

    TRIM MicroSol 685XT is a high-lubricity, low-foaming, extended sump life semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides superior cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. An excellent alternative to soluble oils on high-silica aluminum alloys, Microsol 685XT is compatible with a wide range of materials.

  • High lubricity for extended tool life
  • Low foaming for today's high-pressure, high-volume coolant delivery systems
  • Excellent sump life without the use of tank side additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Extremely hard water stable
  • Forms a tight microemulsion for low carryoff
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 690XT

    High-lubricity, Low-foam Premium Semisynthetic

    TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 692XT

    Premium, High-lubricity, Low-foam Microemulsion

    TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

  • TRIM® MIST

    Synthetic Misting Fluid

    TRIM MIST is a surface active synthetic coolant concentrate for spray mist operations. It is a clear and virtually odorless fluid that controls the overspray that is common with standard cutting and grinding fluids. It works well in cutting/grinding operations or where spray mists are used on boring mills and high-speed face milling.

  • Provides rapid and effective cooling
  • Keeps grinding wheels clean and free of loading
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with all ferrous and most nonferrous materials
  • Compatible with most nonmetallic materials
  • Has very low odor and is pleasant to work with
  • Contains no oil to leave slippery films on the work piece, the machine, or in the surrounding area
  • Has a very low initial odor level which usually disappears after using for one-to-two days
  • Will keep your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools
  • Has exceptional sump life and very good tramp oil rejection

  • TRIM® MQL™ 1000

    Minimum Quantity Lubrication Fluid

    TRIM MQL™ 1000 is a high-performance, vegetable ester-based, micro-lubrication fluid. It is fully compatible with all "micro lube" and micro-mist systems. MQL 1000 contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction. MQL 1000 out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, MQL 1000 may be manually applied to the tool or the work piece.

  • Out-performs the more expensive products
  • Environmentally friendly, renewable resource based
  • Easily water washable — does not produce hard-to-remove residues
  • Very low mist
  • Promotes superior finish and tool life and is compatible with all materials
  • Very high levels of lubricity with even, minimum quantities of material at the point of cut for high material removal rates
  • Has been extensively tested and proven in all major brands of micro lube applicators

  • TRIM® OE209

    Ester Based Cutting and Grinding Oil

    TRIM OE209 is a medium to heavy-duty straight cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximize tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

  • Extremely high lubricity ensures fantastic tool life
  • Excellent detergency keeps grinding wheels clean
  • Does not leach cobalt from carbide tool alloys
  • Chlorine and sulfur free
  • Readily biodegradable
  • Saturated ester based formulation ensures very low foam and misting
  • Very High flash point
  • Unsurpassed oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE310 NS

    Vegetable Ester Based Cutting Oil

    TRIM OE310 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE315 NS

    Vegetable Ester Based Cutting Oil

    TRIM OE315 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE322 NS

    Ester Based Straight Cutting Oil

    TRIM OE322 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OM 100

    Nonchlorinated Cutting Oil

    TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

  • TRIM® OM 287

    Versatile Cutting Oil

    TRIM OM 287 is a straight cutting oil designed for general machining of all metals. OM 287 has a balanced, extreme-pressure package for excellent finishes and tool life on a variety of metals.

  • Excellent lubricity for efficient metal removal
  • Light color and low odor for good operator acceptance
  • Will not stain; runs clear
  • High-quality raw materials resist oxidation
  • Lower viscosity allows better cooling
  • Safe for use on nonferrous as well as ferrous metals

  • TRIM® OM 303

    Nonchlorinated Cutting and Lubricating Oil

    TRIM OM 303 is a highly formulated straight oil designed for use in conventional and Swiss style screw machines, high-speed turning centers, and high-performance, multi-station machines, such as Hydromats. OM 303 is safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. This product is excellent for high-pressure applications such as thread rolling and thread-form tapping. OM 303 has proven itself in difficult operations on stainless and bearing steels. OM 303 provides lubrication properties similar to ISO 32 general-purpose lube oils.

  • Very light colored and clean running
  • Low foaming and low misting for use in aggressive operations
  • Oxidation inhibited for longer life, and an excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
  • Far easier to wash off parts than many oils of similar or even lower performance
  • Has replaced dark, active sulfur/chlorine straight oils in several large operations while providing superior results in tool life
  • An outstanding product in thread rolling, thread form tapping, and in Swiss screw machines with solid bushings
  • Contains no active sulfur; therefore, does not stain parts

  • TRIM® OM220SCF

    Mineral oil and ester based neat oil

    TRIM OM220SCF is a high quality, straight cutting oil designed for general machining operations on both ferrous and non-ferrous alloys. It contains a balanced extreme pressure additive package without the use of chlorine or sulfur. The use of TRIM OM220SCF ensures excellent tool life and surface finishes. TRIM OM220SCF is safe for use on aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze.

  • Low odor and low misting
  • Excellent oxidative stability
  • Formulated to handle a variety of applications
  • Excellent compatibility with copper containing alloys
  • Sulphur and chlorine free extreme-pressure additive package for efficient metal removal
  • Has replaced dark, heavy active sulphur/chlorine oils in several operations while providing superior results in tool life

  • TRIM® OSA

    High-lubricity, Clear Sulfur Oil Additive

    TRIM OSA is a clear oil additive containing inactive sulfur. OSA has outstanding lubricity in all circumstances and provides extreme pressure anti-weld at high speeds and loads.

  • Use as an additive to straight grinding oils, will reduce heat, misting, and allow increased feed rates in creepfeed applications
  • Extend the life of thread-forming taps and thread-rolling dies
  • Use in Swiss-type screw machines using solid carbide bushings to dramatically increase bushing life
  • Compatible with all TRIM straight oils and TRIM TAP LIGHT, TRIM TAP HEAVY, and TRIM TAP NC

  • TRIM® OV 2200

    Premium Vegetable-based Oil

    TRIM OV 2200 is a bio-based straight oil for machining difficult alloys and stainless steels. The formula utilizes a proprietary blend of renewable resources to eliminate the need for traditional additives such as chlorine, sulfur, and animal fats. Allows users to improve their environmental profile by replacing products that contain V.O.C.

  • Environmentally friendly product which is free of V.O.C., chlorine, and animal fats
  • Delivers productivity improvements versus traditional mineral oils
  • Improves shop environment by reducing unpleasant odors and residues
  • Light colored, clean running
  • Versatile formulation developed to machine difficult alloys and stainless steels
  • Protects sensitive aluminum and copper alloys
  • Improves oxidative stability over previous generations of vegetable oils
  • Meets medical industry restrictions

  • TRIM® SC230

    Oil-rejecting Semisynthetic

    TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC230 nd

    Oil-rejecting Semisynthetic - No Dye

    TRIM SC230 nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC230CG

    Oil-rejecting Semisynthetic

    TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC230CG nd

    Oil-rejecting Semisynthetic - No Dye

    TRIM SC230CG nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC520

    General-purpose Semisynthetic

    TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM® SC536

    Low-oil Semisynthetic

    TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

  • TRIM® SC620

    Premium Low-oil Semisynthetic

    TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM SOL®

    General-purpose Emulsion

    TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® LC sf

    General-purpose Emulsion, Nonchlorinated, Siloxane Free

    TRIM SOL LC sf is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.

  • For wide range job applications (from tough assignments such as gear hobbing and broaching to lighter duties like turning) TRIM SOL LC sf has proven equally effective
  • Easily adaptable to nonferrous and ferrous metals
  • Stability - TRIM SOL LC sf forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
  • Machine stays clean with TRIM SOL LC sf's built-in cleaning action - metal chips and dirt will not build up
  • Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® nd

    General-purpose Emulsion - No Dye

    TRIM SOL nd is a no dye soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® TAP HEAVY

    High-lubricity Tapping Fluid

    TRIM TAP HEAVY is a 100% synthetic and vegetable-based lubricant possessing strong friction-reducing properties. Designed as a tough operation product for use with metals of low machinability, it's recommended for use at full-strength, brush-on use for reaming, tapping, and threading.

  • Especially for taps ½" diameter and larger
  • Contains no mineral oils
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TAP LIGHT

    Tapping Fluid

    TRIM TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. Use with metals of low machinability; specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.

  • Especially for taps ¼" diameter and smaller
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TAP NC

    Nonchlorinated Tapping Fluid

    TRIM TAP NC is a blend of synthetic and vegetable-based lubricants and additives with strong friction reducing properties. Use for metals with low machinability at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting, shaving, gundrilling, and reaming.

  • Especially for taps up to 1" diameter
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TC 143

    Phenolic Stabilizer

    TRIM TC 143 is a mixture of emulsifiers and an emulsion stabilizer which, when added to chemical emulsion type products, will help enhance emulsion stability.

  • Emulsion stability
  • Maximize performance

  • TRIM® TC 155

    Nonferrous Corrosion Inhibitor

    TRIM TC 155 is a nonferrous corrosion inhibitor for use in water soluble and straight oil systems. It is particularly effective in preventing staining and white rust on die cast alloys containing copper.

  • Prevents staining and white rust on die cast alloys containing copper
  • Nonferrous corrosion inhibition

  • TRIM® TC 175

    Chlorinated Lubricity Additive

    TRIM TC 175 is a chlorinated EP (extreme pressure) lubrication/emulsifier additive package. It may be added to water-soluble coolant systems to replace or increase the presence of the chlorine EP additives in the system.

  • New, easier to mix formulation
  • New, chlorine EP additives stay in systems longer

  • TRIM® TC 177

    Odor Mask

    TRIM TC 177 is a "vanilla" odor mask. This product may be used to reduce some of the odors associated with coolant systems.

  • "Vanilla" odor mask

  • TRIM® TC 184B

    Nonsilicone Antifoam

    TRIM TC 184B is a nonsilicone antifoam or defoamer. It is used as a tank-side add to control foam in water-miscible coolants, washing compounds, floor soaps, etc.

  • Antifoam
  • Nonsilicone

  • TRIM® TC 204

    Blue Dye

    TRIM TC 204 is a water-soluble blue dye. The product is used tank side to replenish depleted dye in water-soluble products or to color undyed products.

  • Blue dye
  • Water soluble

  • TRIM® TC 211

    pH Adjuster/Emulsion Stabilizer

    TRIM TC 211 is an amine-based pH adjuster used to replenish depleted alkalinity in metalworking fluid working solutions. It is especially effective in central systems and batch recycling systems.

  • pH adjustment
  • Emulsion stabilization
  • Central systems
  • Replenish depleted alkalinity

  • TRIM® TC 220

    pH Adjuster

    TRIM TC 220 is a triazine compound that is very effective in maintaining pH and building reserve alkalinity in metalworking fluid working solutions. Controlling pH within the design range of the product and maintaining an appropriate level of reserve alkalinity are key elements in extending sump life, controlling both liquid and vapor phase corrosion, and emulsion stability of soluble oils.

  • pH adjustment
  • Building reserve alkalinity
  • Extending sump life
  • Controlling both liquid and vapor phase corrosion

  • TRIM® TC 233

    Lubricity Additive

    TRIM TC 233 is a dual-purpose additive which is used in synthetic (e.g., TRIM C270, C276, etc.) and some semisynthetic (e.g., TRIM SC230, SC520, etc.) coolants. It can increase lubricity for operations such as drilling or tapping. At fluid temperatures above 95°F (35°C), it will act as an anti-foam.

  • Increase lubricity
  • Reduce friction

  • TRIM® TC 239

    Paintable Antifoam/Defoamer

    TRIM TC 239 is a paintable, plateable additive used to control foam in metalworking fluids and parts washing systems.

  • Paintable
  • Plateable

  • TRIM® TC 251

    Non-chlorinated Lubricity Additive

    TRIM TC 251 is a non-chlorinated lubricity additive. It is used as a tank-side additive to water-soluble and semisynthetic coolant systems to increase lubricity.

  • Non-chlorinated
  • Increases lubricity in water-soluble and semisynthetic coolant systems
  • New chlorine free EP additives stay in systems longer

  • TRIM® TC 252

    Water Conditioner and Defoamer

    TRIM TC 252 is a calcium acetate tank-side-add water conditioner used to aid in the control of foam. TC 252 replenishes the calcium when the calcium may have been stripped though reverse osmosis or deionization.

  • Water Conditioner
  • Defoamer
  • Calcium replenisher
  • Also conditions water that is naturally soft and low in calcium

  • TRIM® TC 253

    Straight Cutting Oil Defoamer

    TRIM TC 253 is a tank-side additive used to control foam in straight oil operations.

  • Straight oil defoamer

  • TRIM® VHP® E200PW

    Very High-pressure, Pratt & Whitney Approved Emulsion

    TRIM VHP E200PW is an emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials and it applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.

  • Pratt & Whitney (PMC 9390) approved for use in all grinding and machining operations on all metals
  • No foam at very high pressures and volumes
  • Contains a proven and highly effective, nonchlorinated, extreme-pressure additive to control built-up edge and wheel loading
  • Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Easy recycling or disposal with conventional techniques and equipment
  • Runs effectively for long periods without the need for costly additives

  • TRIM® VHP® E210

    Very High-pressure, Chlorine-free Emulsion

    TRIM VHP E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® VHP® E320

    Very High-pressure, High-lubricity Emulsion

    TRIM VHP E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little- to no- foam.

  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

  • Master STAGES

    Master STAGES™ CLEAN 2017

    Economical Heavy-duty Spray Cleaner

    Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

  • Very economical way to remove heavy soils and light rust
  • Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
  • Can be recycled using XYBEX equipment
  • Contains no solvents, borates, silicates, nitrites, or amines
  • Long bath life
  • Excellent compatibility with magnesium
  • Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

  • Master STAGES™ CLEAN 2020

    Washing Compound for Ultrasonic and Immersion Washers

    Master STAGES™ CLEAN 2020 is a concentrate very high-performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020's oil rejecting properties mean longer bath life and economical operation.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
  • Will provide extended in-process tarnish resistance on copper and copper alloy parts
  • Safe on aluminum, aluminum alloy, and magnesium
  • Will remove coolant residues as well as straight oils

  • Master STAGES™ CLEAN 2029 'One Step'

    Parts Washing Fluid with Corrosion Inhibitor

    Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
  • This formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

  • Master STAGES™ CLEAN 2030

    Cleaner/Corrosion Inhibitor for Ultrasonic and Immersion Washers

    Master STAGES™ CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030's oil-rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer
  • Will provide one-to two-weeks' indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
  • Will remove coolant residues as well as straight oils

  • Master STAGES™ CLEAN 2115AL

    Low-foam Spray Washing Compound

    Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

  • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
  • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
  • Provides short-term corrosion inhibition on cast iron and ferrous alloys
  • Excellent biostability
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

  • Master STAGES™ CLEAN 2118

    Low-foam Spray Washing Compound

    Master STAGES™ CLEAN 2118 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces.

  • Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2118 an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Provides excellent short-term corrosion inhibition on most common ferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

  • Master STAGES™ CLEAN 2430

    Near-neutral Washing Compound

    Master STAGES™ CLEAN 2430 is a highly-concentrated, mild pH, liquid parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in-process corrosion inhibition when not rinsed.

  • CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
  • Nitrite and silicate free and leaves no powdery residue
  • Low foaming at normal operating temperatures for use in high-pressure spray washers
  • CLEAN 2430 "splits" oils to the surface of the cleaner tank for easy skimming
  • Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
  • Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
  • Provides long life between washer cleanouts

  • Master STAGES™ CLEAN AMO™

    Natural-solvent Cleaner and Degreaser

    Master STAGES™ CLEAN AMO™ A maize `N Orange™ is a natural-solvent cleaner that can be mixed with water and used for a wide range of industrial cleaning jobs. CLEAN AMO does an outstanding job removing oily, greasy, or resinous soils at room temperature.

  • CLEAN AMO cleans with natural solvents extracted from corn (maize) and oranges (d-limonene), along with several additional ingredients that improve performance and water mixability
  • With a neutral pH and low conductivity, AMO will not cause splitting of TRIM coolants
  • Compatible with ultrafiltration systems and bioremediation
  • Unlike most water-mixable degreasers, CLEAN AMO does not require heating to remove greases and resins
  • AMO can be used straight (100%) or cut back with water depending on the application
  • There are no mineral oils or petroleum solvents in CLEAN AMO
  • AMO can be used for general cleaning tasks and to remove soils from parts, tools, and machines
  • Users like CLEAN AMO's very mild, pleasant orange scent
  • Environmental approvals are simplified because CLEAN AMO contains no nitrites, barium, phenols, or butyl cellusolve and has no SARA 313 reportable ingredients
  • Effective mop bucket cleaner
  • For use in floor scrubber machines
  • Rinses off easily with plain water

  • Master STAGES™ CLEAN DF1

    Antifoam for Master STAGES™ Cleaners

    Master STAGES™ CLEAN DF1 is a paintable, nondimethyl, polysiloxane, antifoaming agent designed to eliminate excessive foaming in Master STAGES™ products. This product does not require premixing.

  • Does not require premixing
  • Compatible with most Master STAGES cleaners and most water-based metalworking fluids
  • Odorless
  • Does not cause staining
  • Is free of phenols, borates, phosphates, nitrites, or amines

  • Master STAGES™ CLEAN F2™

    Non-butyl Floor and Multi-purpose Cleaner

    Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

  • With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants
  • Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
  • CLEAN F2 has been proven nonirritating to skin at 20% concentration
  • Excellent choice for use in spray bottles up to 20%
  • Use for general cleaning tasks and to remove soils from parts and tools
  • Operators like CLEAN F2's mild, pleasant citrus scent
  • Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients
  • Effective mop bucket cleaner
  • Use in floor scrubber machines
  • Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

  • Master STAGES™ CLEAN IP 2019s

    Silicated Low-foam Cleaner

    Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

  • An excellent cleaner and very economical to use
  • Compatible with aluminum, cast iron, and steel alloys
  • Rejects oil for easy skimming or centrifuging to extend bath life
  • Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
  • Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

  • Master STAGES™ NOCOR® E6

    Low V.O.C. Emulsion Corrosion Inhibitor Concentrate

    Master STAGES™ NOCOR E6 is a super-concentrated, barium-free, water-based emulsion rust inhibitor that will protect steel, cast iron, and other ferrous parts from in-plant corrosion for up to six months. Parts coated with NOCOR E6 have a soft, almost invisible film that is easily removed using mild cleaners.

  • Environmental approvals are simplified because NOCOR E6 is nitrite, barium, boron, phenol, and phosphate free
  • NOCOR E6 is low foaming, for use in low-pressure spray washers and flow coating operations. Dip application is also a good way to apply this product
  • An excellent choice where both ferrous and/or copper alloy parts are being processed
  • NOCOR E6 has a moderate pH, is practically odorless, and is nonflammable for improved safety
  • Working concentration ranges from 4% - 16% which translates into much lower cost than traditional straight oil/solvent products

  • Master STAGES™ NOCOR® S2

    Water-soluble Corrosion Inhibitor

    Master STAGES™ NOCOR S2 is a synthetic, water soluble, ferrous corrosion inhibitor for short-term storage or shipment. Effective at concentrations from 3% - 10% in water, it provides a very thin, water-soluble protective film.

  • The transparent film left by NOCOR S2 is easily removed and will not interfere with additional machining, gauging, or assembly steps
  • Barium free and contains very low levels of volatile organic compounds as applied

  • Master STAGES™ RINSE 100

    Mild Alkaline Detergent

    Master STAGES™ RINSE 100 is a washing compound concentrate that does a great job of removing metalworking fluids and light oily films. This product will not stain ferrous or nonferrous materials and leaves an extremely thin film corrosion inhibitor, which does not interfere with gauging of parts. RINSE 100 is compatible with the TRIM family of cutting and grinding fluid concentrates.

  • Effective machine cleaner
  • Great for general cleaning of loose tools and parts
  • Excellent for use in ultrasonic cleaner systems and immersion washers
  • Provides up to one week or more of in-process corrosion inhibition on ferrous parts

  • Master STAGES™ RPO 6BF

    Barium-free, Low Odor, Corrosion Inhibitor

    Master STAGES™ RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF provides indoor corrosion inhibition, excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.

  • Barium free
  • Light film for limited carryoff
  • Excellent corrosion inhibition, generally in excess of six months in dry storage
  • Nonstaining
  • Provides cleaning action
  • Water displacing to help prevent rust due to water trapped under the protective film
  • Oxidation resistant to resist tarnishing over long storage periods
  • Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"
  • Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)

  • Master STAGES™ SkidRid™

    Butyl-Free/Phosphate-Free Floor & Multi-Purpose Cleaner/Degreaser

    Master STAGES™ SkidRid™ is a highly concentrated cleaner built for multiple uses including floor cleaning and general degreasing. In addition to automatic floor scrubbers, it does a great job in general purpose cleaning, mop bucket cleaning, and parts washing in room-temperature wash tanks. SkidRid is completely free of 2-butoxyethanol (Butyl) and is not reportable under SARA section 313.

  • Specially formulated to lift off stubborn tire marks — pre-application from a spray bottle followed by power floor scrubbing can often deal with the most difficult areas
  • Contains no 2-butoxyethanol (Butyl), an ingredient of increasing concern often found in products of this type
  • All of the ingredients used in SkidRid are biodegradable
  • Economical to use because it is very highly concentrated — a little bit goes a long way
  • Can be used for general cleaning tasks and to remove soils from parts and tools
  • Hard water tolerant
  • Mild, pleasant scent
  • Environmental approvals are simplified because SkidRid contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and is not SARA 313 reportable
  • Effective in immersion style washers and ultrasonic baths can be used at room temperature up to 120°F (49°C)
  • Effective mop bucket cleaner in addition to being useful in floor scrubber machines
  • Removes heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; thereby suitable for concrete, painted tile, or linoleum floors

  • Master STAGES™ Skramex™

    High-powered, Non-butyl Floor Cleaner Super Concentrate

    Master STAGES™ Skramex™ is a super concentrated, high-powered cleaner designed for factory floor cleaning and heavy maintenance cleaning, particularly in metalworking or rebuild shops and mills. This product is highly caustic and capable of emulsifying even the most difficult floor soils such as those used in machining, drawing, stamping, foundries, and mills. Skramex is specially formulated without 2-butoxyethanol (Butyl) to eliminate government reporting requirements.

  • Economical because it is super concentrated, Skramex will clean most soils at concentrations of 0.5% or less when used in a power floor scrubber
  • Skramex is formulated specially to remove oils, drawing compounds, carbon residue, and other heavy soils, while not harming concrete (this can be a problem with cheap floor cleaners)
  • Not just a floor cleaner, Skramex works in both power floor scrubbers and mop buckets, and can be used for very heavy-duty maintenance cleaning jobs; also effective and economical when used as a cold-soak cleaner for ferrous parts
  • Your floor scrubber or mop bucket will go further and last longer because Skramex has super high concentrations of surfactants, solvents, and alkaline builders to make it last a long time (this saves you time and reduces waste because you can spend more time cleaning and have less dirty water to dispose of)
  • Environmental approvals are simplified because Skramex contains no nitrites, phosphates, barium, phenols, or 2-butoxyethanol (Butyl); this formula has very low V.O.C. content and no SARA 313 reportable ingredients

  • Master STAGES™ Task2™ APC

    All-purpose Cleaner

    Master STAGES™ Task2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.

  • Use full strength or dilute
  • Versatile all-around shop cleaner
  • Pratt Whitney Aerospace Approval PMC 1455-11
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ Task2™ GC

    Glass Cleaner

    Master STAGES™ Task2™ Glass Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning machine tool glass and other hard surfaces.

  • Use full strength
  • For glass and plexiglas shop cleaning
  • Pratt Whitney Aerospace Approval PMC 1406-41
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ Task2™ GF

    Grime Fighter, Super Strength Industrial Cleaner

    Master STAGES™ Task2™ is a grime fighting, industrial strength, non-butyl, water-based cleaning agent that does an outstanding job in the industrial, commercial, or office environment. Task2 out-cleans all the green, crystal, purple, "mean", "complex", and "simple" butyl-based products you may have tried in the past.

  • Use full strength or dilute up to 100:1
  • For the toughest industrial cleaning applications
  • Pratt Whitney Aerospace Approval PMC 1247-1
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ Whamex™

    Machine Tool Sump and System Cleaner

    Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws many years of hands-on experience in machine clean outs
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

  • Master STAGES™ Whamex XT™

    Low-foam Machine Tool Sump and System Cleaner

    Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws on many years of hands-on experience in machine cleanouts
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

  • XYBEX

    Master Coalescer Jr™

    High-performance, low-maintenance coalescer removes tramp oil while machine is running

    Committed today for a greener tomorrow.



    Master Coalescer Jr packs the punch to add up to BIG savings.

    A low-cost, smaller yet effective, tramp oil separator: Master Coalescer Jr.™ Compact and affordable, Master Coalescer Jr processes machine tool coolants to remove tramp oils and fines and provide clean, reusable coolant – paying for itself with extended coolant and tool life, improved machinability, and reduced maintenance.

    Extremely efficient, "Junior" offers:

    • Compact design to work with CNC machines with small, hard-to-access coolant sumps
    • Maximum tramp oil removal while machine is running
    • Minimal maintenance
    • Simplified operation; less operator involvement
    • Portability allows shared use on several machine tool sumps

    Features

    • Up to 1 GPM flow rate, no adjustments to make
    • Pre-pump strainer
    • Electric 120 volt diaphragm pump – primes to 48"
    • Easily removable media pack with 132 square feet of coalescing surface area
    • Valve to easily drain and clean tank
    • Internal adjustable tramp oil discharge valve
    • Adjustable leveling pads
    • New floating skimmer – only 3" diameter – works in sumps as shallow as 11/2" deep to collect oils and soiled fluid



    MISCO Palm Abbe™ Digital Refractometer

    Laboratory Precision in the Palm of Your Hand!

    The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision, but laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer.

    The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button. The custom-designed microprocessor delivers a nearly instantaneous readout in degrees Brix. Nonlinear temperature compensation is automatic and insures that fluids read between 0°C and 50°C (32°F to 122°F) are measured accurately.

    The large LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options.

    Calibration is automatic and does not require the use of special calibration solutions, or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.




    SCROUNGER® Jr Oil Skimmer

    Effectively Remove Oil from Coolants and Washing Solutions

    Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.

    Tramp oil contributes to the growth and formation of:

    • coolant-destroying bacteria
    • undesirable residues on machine tools and workpieces
    • smoke and oil mist in shop atmospheres

    These problems result in:

    • shortened coolant life
    • poor material removal rates
    • poor surface finish and size control
    • decreased tool and wheel life

    Numerous devices ("floating ropes," wheels, and belts) have been developed over the years to remove "free floating" tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either "troublesome," high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations.

    As a "belt-type" skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER Jr. uses the same "oil loving" belt, but uses a more compact scraper blade to strip the separated oil from the belt.

    Features

    • 115 volt, single phase, 50/60 Hz
    • heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt, single phase, 50 Hz also available)
    • open, accessible oil-collecting tray with a convenient drain connector
    • "oil loving" oleophilic belt (purchased separately)
    • heavy-duty steel construction, with industrial-grade enamel paint

    Benefits

    • fast, simple belt changing
    • low maintenance
    • lower hang roller that will not fall off in the machine sump even in turbulent conditions

    Options

    • dewatering tray
    • portable kit
    • special length belts available on special order
    • special belt materials available for high temperature or pH applications on special order

    SCROUNGER Jr Belts

    • all belts 1" [25mm] wide
    • 24" [610mm]
    • 32" [815mm]
    • 44" [1120mm]



    UNIMIX™ EMC



    UNIMIX™ EMC is a high accuracy self-powered proportioning pump made specially for dispensing Master STAGES™ cleaning compounds. Special components resist even high pH powered cleaner formulations.

    Benefits

    • Concentration control
    • Reduces concentrate waste
    • Easy to install
    • Reliable and consistent
    • Nonelectrical
    • Adjustable

    Mixture Range

    • UNIMIX EMC 1% to 6% (up to 12pH)



    Yellow Bellied Sump Sucker™ Li'l Sucker™


    The Li'l Sucker™ is the newest addition to the Yellow Bellied Sump Sucker™ line of sump cleaning vacuums. Based on extensive customer research and extended field trial experience, customers were able to tell us what they liked, disliked, felt had no value, and would change in the previous designs. The result was the Yellow Bellied Sump Sucker that customers designed. It is durable, highly maneuverable, easy to use, and provides exceptional suction and discharge flow rates.

    • Removes the coolant, sludge, and chips from the sump
    • Filters the sludge and chips from the fluid
    • Returns filtered coolant to the machine tool sump, or
    • Transports the coolant to waste treatment for disposal, or to a XYBEX Recycling System for recycling

    Features

    • Tank capacity of 50 gallons (190 liters)
    • Suction rate up to 85 GPM (320 LPM)
    • Discharge rate up to 40 GPM (150 LPM)
    • 1.6 ft3 (45 dm3) chip basket holding capacity, roughly 12 gallons (45 liters)
    • Available in both air venturi and electric models
    • 120 VAC, single phase, 50 Hz/60 Hz electric model standard
    • 220 VAC, single phase, 50 Hz/60 Hz electric model optional
    • Complete with hoses and straight cleaning tool
    • Optional cleaning tools available
    • Perfect for today's smaller machine tool sumps