Fluid Products / Bearing

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

• Very low foam and mist
• Provides excellent corrosion inhibition on all common ferrous alloys
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
• Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
• Extremely low carryoff for very low total operation costs
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odor which dissipates further after one or two days
• Minimizes the buildup of sticky residues

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Compatible with cobalt alloys
• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 692XT bd is a blue dye, high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT bd!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

• Very economical way to remove heavy soils and light rust
• Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
• Can be recycled using XYBEX equipment
• Contains no solvents, borates, silicates, nitrites, or amines
• Long bath life
• Excellent compatibility with magnesium
• Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

• With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants
• Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
• CLEAN F2 has been proven nonirritating to skin at 20% concentration
• Excellent choice for use in spray bottles up to 20%
• Use for general cleaning tasks and to remove soils from parts and tools
• Operators like CLEAN F2's mild, pleasant citrus scent
• Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients
• Effective mop bucket cleaner
• Use in floor scrubber machines
• Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

Master STAGES™ NOCOR™ O3T is a barium-free, non-staining, water displacing, thin-fiIm corrosion inhibitor or rust preventative which can be used on a variety of metals. NOCOR O3T provides indoor corrosion inhibition and excellent protection for bearings, precision parts, in-process parts in storage, and parts in transit.

• Barium free
• Light film for limited carry-off
• Excellent corrosion inhibition, generally in excess of three months in dry storage
• Non-staining
• Water displacing to help prevent rust due to water trapped under the protective film
• Oxidation resistant to resist tarnishing over long storage periods
• Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"
• Humidity Cabinet Test: No rust at 176 hours (ASTM D1748)

Master STAGES™ NOCOR™ O6T is a barium-free, non-staining, water displacing, thin-fiIm corrosion inhibitor or rust preventative which can be used on a variety of metals. NOCOR O6T provides indoor corrosion inhibition and excellent protection for bearings, precision parts, in-process parts in storage, and parts in transit.

• Barium free
• Light film for limited carry-off
• Excellent corrosion inhibition, generally in excess of six months in dry storage
• Non-staining
• Provides cleaning action
• Water displacing to help prevent rust due to water trapped under the protective film
• Oxidation resistant to resist tarnishing over long storage periods
• Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"
• Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)