Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support
TRIM C320
Description Application Guidelines Properties Concentrations Mixing Ordering Information Additional Information
SDS (Customer Member Login) Data Sheet
Brochures
Case Studies
Technical Bulletins
Technical Articles
Tech Tips
Press Releases
Documents
Videos
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM® C320

High-lubricity Synthetic

TRIM<sup>®</sup> C320 - 5 gallon pail

Application Guidelines

  • C320 has increased tendency to foam as the fluid temperature falls below 80°F (27°C).
  • Concentration should be kept at 7.5% or higher for operations at lower SFPM, soft or "gummy" material, or operations where finish is a factor.
  • C320 is not recommended in machine tools that rely on splash lubrication from the coolant; e.g., older screw machines or transfer machines.
  • C320 is not recommended on magnesium or zirconium without special precautions.
  • This product may "wash out" dirt and residues when a machine is first charged. Machines should be thoroughly precleaned with Whamex XT™.
  • Concentrations of 7.5% - 10% usually give the best tool life, finish, and sump life; however, the best concentration for your operation should be determined by on-site testing.
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/na/en-us/distributors/index.php, your District Sales Manager, or call our Tech Line at 1-800-537-3365.

TRIM® C320   
©2001-2024 Master Fluid Solutions®