Synthetic

TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

Does an excellent job in most glass, ceramic, and composite grinding applications

Excellent corrosion inhibition on most common ferrous and nonferrous alloys

Extremely low carryoff keeps operating costs down

Low foam and mist

Very low initial odor level which usually disappears after one-to-two days

Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts

Exceptional sump life and very good tramp oil rejection

Synthetic Metalworking Fluid

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

Does an excellent job in most glass, ceramic, and composite grinding applications

Excellent corrosion inhibition on most common ferrous and nonferrous alloys

Extremely low carryoff keeps operating costs down

Low foam and mist

Very low initial odor level which usually disappears after one to two days

Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts

Exceptional sump life and very good tramp oil rejection

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites

Provides excellent corrosion inhibition on all common ferrous alloys

Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives

Extremely low carryoff for very low total operation costs

Very low foam and mist

Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips

Exceptional sump life and very good tramp oil rejection

A very low initial odor level which usually disappears after one-to-two days

Clean-running Synthetic

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

Very low foam and mist

Provides excellent corrosion inhibition on all common ferrous alloys

Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning

Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations

Extremely low carryoff for very low total operation costs

Exceptional sump life and very good tramp oil rejection

Low initial charge odor which dissipates further after one or two days

Minimizes the buildup of sticky residues

Economical Synthetic Fluid for Aluminum Machining

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000

Water-clear, low-foaming and -misting, C290 is a joy to work with and manage

Provides good results in a wide range of grinding and machining operations

Excellent tramp oil rejection

Easily removed from parts for easy cleanup before assembly, painting, or plating operations

PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone

Very low carryoff and long sump life results in low operating cost

Premium Synthetic Metalworking Fluid

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

Meets the most stringent nuclear and aerospace chemical content and machining requirements

Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels

Water-clear, low foaming, and misting, C350 is a joy to work with and manage

Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture

Easily removed from parts for easy cleanup before assembly, painting, or plating operations

PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone

Very low carryoff and long sump life results in low operating cost

High-lubricity Honing Synthetic

TRIM C385 is a state-of-the-art synthetic coolant which provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness. C385 meets the need of the modern job shop for a single premium synthetic coolant for honing and virtually all machining operations.

Very low foam and mist

Great for form grinding, honing, boring, rolling, etc

Exceptional sump life and very good tramp oil rejection

Extremely low carry-off for very low total operating costs

Very low initial odor which usually disappears after 1-2 days

Compatible with dirty or grey cast iron cutting, grinding, and honing

Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts

The residual film is easily resoluble in the coolant working solution to facilitate easy machine cleaning and to minimize the buildup of sticky residues that can hold machine-destroying chips

High-performance Fluid for Hard Disk Drives

TRIM DRIVE CF3 is a specialized, chlorine-free, heavy-duty coolant formulated to meet the high-precision machining and stringent chemical restrictions of the Hard Disk Drive (HDD) industry. It has very good wetting and great lubricity resulting in excellent surface finishes and its ease of wash-ability makes DRIVE CF3 an excellent choice for HDD components manufacturers. TRIM DRIVE CF3 will run in high-pressure situations with little to no foam.

In addition to aluminum alloy, it is also suitable for a wide range of materials including steels and stainless steels

Low foam even in high-pressure operations without the use of silicone antifoam

Good hydrodynamic lubrication to perform reaming and threading applications

Excellent anti-weld properties without the use of either chlorinated or sulfurized EP additives

Keeps machines very clean while leaving a fluid, oily residue for ease of cleaning and reduced machine maintenance costs

Does not require special disposal and is easily recycled

Non-staining on aluminum alloys commonly used to produce HDD components

After machining, parts can be washed easily and completely in aqueous washing systems

Premium Cutting Fluid for HDD Manufacturing

TRIM DRIVE G81 NXT is a specialized, chlorine-free, moderate to heavy duty metal cutting fluid formulated to meet the high-precision machining and stringent chemical restrictions of the Hard Disk Drive (HDD) industry. TRIM DRIVE G81 NXT has very good wetting and lubricity giving excellent surface finishes. Its ease of washability makes TRIM DRIVE G81 NXT an excellent choice for HDD components manufacturers. TRIM DRIVE G81 NXT will run in high-pressure situations with little to no foam.

In addition to aluminum alloy, TRIM DRIVE G81 NXT is also suitable for a wide range of materials including steels, titanium, and stainless steels

Low foam even in high-pressure operations without the use of silicone antifoam

Good hydrodynamic lubrication to perform reaming and threading applications

Excellent anti-weld properties without the use of either chlorinated or sulfurized EP additives

Does not contain mineral oil for near zero hydrocarbon contamination level

Keeps machines very clean while leaving a soft film that protects machine surface, for ease of cleaning and reduced machine maintenance costs

Does not require special disposal and is easily recycled

Designed to be used with deionize water without having any foam issues

Non-staining on aluminum alloys commonly used to produce HDD components

Parts machined with TRIM DRIVE G81 NXT can be washed easily and completely in aqueous washing systems

Long-life Emulsion

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

Very stable formula provides good operational life with consistent performance

Has a very wide application range allowing its effective use on cutting and grinding

Good hard water tolerance

Works very well in general machining where traditional soluble oil may not cool sufficiently.

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Good balance of cooling and lubrication to provide good tool life and surface finishes

Compatible with most aluminum, steel, cast iron and brass material

High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled

Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures

Good cleaning performance keeps machine tools clean

Easy recycling or disposal by using conventional techniques and equipment

Low-foam, High-lubricity Emulsion

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

Very wide application range

Good hard water tolerance

Keeps machine tools clean

Works very well in general machining

Very stable formula provides good operational life with consistent performance

High tramp oil resistance for easy oil removal and longer coolant life

Easily recycled or disposed of using conventional techniques and equipment

Good balance of cooling and lubrication providing good tool life and surface finishes

Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Premium Universal Emulsion

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

Very wide application range

Good hard water tolerance

Keeps machine tools clean

Works very well in general machining

Very stable formula provides good operational life with consistent performance

High tramp oil resistance for easy oil removal and longer coolant life

Easily recycled or disposed of using conventional techniques and equipment

Good balance of cooling and lubrication providing good tool life and surface finishes

Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Premium Universal Emulsion - Blue Dye

TRIM E935 bd is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 bd makes it a first choice for precision and consistent parts manufacturing.

Very wide application range

Good hard water tolerance

Keeps machine tools clean

Works very well in general machining

Very stable formula provides good operational life with consistent performance

High tramp oil resistance for easy oil removal and longer coolant life

Easily recycled or disposed of using conventional techniques and equipment

Good balance of cooling and lubrication providing good tool life and surface finishes

Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Boron Free - Carbide Grinding Synthetic

TRIM GRIND WCS minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving "G RATIOS" and reducing grinding forces. GRIND WCS is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.

PRTR compliant

Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems

Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks

Is not stripped out by conventional filtration systems

Operators like GRIND WCS’s clear working solution for superior visibility while grinding

Exceptional sump life and good tramp oil rejection for easy skimming

Resists oxidation and varnishing

Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines

Very low carryoff equals low fluid makeup costs

Easy recycling or disposal with conventional techniques and equipment

neo-synthetic precision aerospace machining fluid

Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel^®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

U.S. Patent 11,396,708

exceptional performance on hard aerospace metals

superior lubricity for machining softer aluminum alloys

trouble-free production

safest, environmentally-friendly ingredients

long-running lifespan delivers high customer value

less scrap, low foam and low odor

Low-foam Ferrous Semisynthetic

TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

Low foaming for today's demanding high-pressure, high-volume applications

Also for machining some aluminum alloys and nonferrous metals

Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Requires no special disposal or recycling

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

Dramatically extends useful life without the need for tank-side biocides or fungicides

Low foaming for todays demanding high-pressure, high-volume applications

Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites

Optimized combination of cooling and lubricity for titanium machining applications

Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives

Provides superior corrosion inhibition on all ferrous and nonferrous metals

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Uses standard metalworking recycling and disposal techniques

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

Meets the most stringent aerospace specifications and has received many aerospace approvals

Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials

Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines

Dramatically extends useful life without the need for tank-side biocides or fungicides

Low foaming for todays demanding high-pressure, high-volume applications

Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Provides superior corrosion inhibition on all ferrous and nonferrous metals

Keeps parts and machines very clean to reduce maintenance and production time

High-lubricity, Low-foam, Medical Grade Microemulsion

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

Conformance to EH&S requirements for the medical industry

Improved lubricity for longer tool life

Extended useful life without the need for tank-side biocides or fungicides

Halogen free formulation

Low foaming for today’s demanding high-pressure, high-volume applications

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Superior corrosion inhibition on all ferrous and nonferrous metals

High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance

Ease of disposal with no special disposal or recycling techniques or requirements

Premium High-lube PRTR Microemulsion

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys

Greatly extends useful life without the need for tank side biocides or fungicides

Low foaming for modern high-pressure, high-volume applications

Uses standard metalworking recycling and disposal techniques

Does not contain any chemical listed under Japan PRTR regulation

Provides superior corrosion inhibition on all ferrous metals

Premium High-lube PRTR Microemulsion - Blue Dye

TRIM MicroSol 687NXT bd is a clear blue, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys

Greatly extends useful life without the need for tank side biocides or fungicides

Low foaming for modern high-pressure, high-volume applications

Uses standard metalworking recycling and disposal techniques

Does not contain any chemical listed under Japan PRTR regulation

Provides superior corrosion inhibition on all ferrous metals

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

Dramatically extends useful life without the need for tank-side biocides or fungicides

Boron and halogen free

Low foaming for todays demanding high-pressure, high-volume applications

Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives

Provides superior corrosion inhibition on all ferrous and nonferrous metals

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Uses standard metalworking recycling and disposal techniques

Premium, High-lubricity, Low-foam Microemulsion - Blue Dye

TRIM MicroSol 692XT bd is a blue dye, high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT bd!

Improved lubricity for longer tool life

Dramatically extends useful life without the need for tank-side biocides or fungicides

Halogen free

Low foaming for todays demanding high-pressure, high-volume applications

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Provides superior corrosion inhibition on all ferrous and nonferrous metals

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Requires no special disposal or recycling techniques

High-performance Grinding and Honing Oil

TRIM OG205 is a very-high-specification grinding and honing oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined mineral oil with low aromatic content, which ensures very low levels of mist and high flash point. TRIM OG205 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

No reaction with cobalt

Very highly refined base oil ensures low mist and high flash point

Can be used for light duty universal machining operations

Good flushing properties keeps grinding wheels very clean

Excellent friction reducing properties ensures long wheel life

Excellent heat transferring properties

Excellent oxidation stability

Highly filterable in pre-coat filter systems

Low foaming

Kind to machine components and elastomers

Light color and low odor for good operator acceptance

High-performance, Cutting and Grinding Oil

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

Light color and low odor

High flash point

Minimal carry over loss

Excellent chips flushing and low foam

Oxidation inhibited for longer life

Excellent tool life properties

Heavy-duty Cutting Oil

TRIM OM350C is a heavy duty, mineral oil based cutting oil formulated with high performance synthetic ester-based additives. It can be used for a variety of metal cutting and grinding processing, especially suitable for steel broaching. This product is also suitable for tapping, milling, and reaming processes. Also suitable for multi metal applications such as copper alloy, aluminum alloy, and heat-treated steel.

Excellent extreme pressure lubrication, inhibiting BUE generated, providing an excellent surface finish

Provides excellent lubrication and cooling for machining deep holes

Low oil mist, low volatility, maintains a clean working environment

Microemulsion Semisynthetic

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites

Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Has exceptional sump life and very low makeup for extremely low total operating cost

Low odor and mist makes for an operator-friendly product

Extremely effective EP additive package

Contains no nitrites, heavy metals, phenolic compounds

Easy recycling or disposal with conventional techniques and equipment

Chlorine-free Semisynthetic Coolant

5 drum^∗ minimum batch order size. Pricing and delivery available upon request.

TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil

Low foaming in most operations

Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material

Will provide superior sump life and corrosion inhibition for long periods of time without adds

Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron

Will keep the machine and work environment clean even when machining or grinding gray iron

Contains no chlorine or sulfur-based additives

Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable

Very low carryoff and long sump life, delivering low operating costs

Hard water tolerant up to 30 grains

High-performance Semisynthetic Fluid

TRIM SC538AL is a high-performance semisynthetic fluid that provides excellent boundary lubrication characteristics for aluminum alloy machining. Suitable for general cutting of ferrous and non-ferrous metal materials, TRIM SC538AL achieves very satisfactory surface finishes and is widely used in the automotive and general machining industry. TRIM SC538AL complies with environmental protection and safety laws and regulations for automotive metalworking fluids, as well as the relevant element restrictions in Europe, USA, and Japan.

Excellent cooling and lubrication properties, provides ultra-fine surface finish for aluminum alloy machining

Provides excellent anti-corrosion protection for non-ferrous metals such as aluminum while avoiding corrosion and discoloration of the workpiece

Suitable for stainless steel, aluminum alloys, and other non-ferrous and ferrous metals

Excellent anti-foaming performance

No sticky residue on the surface of the work piece

Coolant residues are easily removed with water, working fluid, or water-based cleaning agents

Good cleaning performance keeps the machines very clean

Easy recycling and disposal with conventional techniques and equipment

Provides excellent safety, reducing the risk of allergies for workers

Meets the requirements of customers with high compliance requirements for metalworking fluids.

General Purpose Semisynthetic

TRIM SC639 is a general purpose semisynthetic cutting and grinding fluid concentrate which provides an excellent balance between cooling and lubricity. SC639 has very good corrosion protection for both ferrous and non-ferrous metal, and can be used for a wide range of high-speed turning and grinding operations. SC639 leaves a thin layer of water soluble oil residue that provides extra protection to the machine tools parts while keeping the machine clean.

Provides excellent lubricity for various machining applications

Provides excellent corrosion and rust inhibition on ferrous and nonferrous alloys, preventing clinkering problems of cast iron chips in machining

Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance

Long sump life and low coolant consumption that reduce the cost for user

Low odor and mist that provides a good working environment

Good hard water tolerance up to 40 grain

Easy recycling or disposal with conventional techniques and equipment

Dewatering-fluid 104°F (40°C) flash point

WEDOLiT AS 1012 is a dewatering fluid with corrosion protection properties. It uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can efficiently be dewatered. It is mainly used as an immersion bath at room temperature.

Due to its strong dewatering effect, residues of flushing water or water containing fluids including emulsions or synthetic coolants are removed from the metal surface

After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage

Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off

Development of a clear phase boundary between the water and the product, without forming an emulsion phase

Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCI foils

Excellent bath-life

Additive loss due to water contact: None

Long term DW Fluid 104°F (40°C) flash point

WEDOLiT AS-2251 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

Ideal for overseas transport

Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils

Stable against acidic and alkaline contamination

Good material compatibility

Water displacing with very good wetting behavior

Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners

Additive loss due to water contact: Very low

High-Protection-Waxdispersion-Fluid 104°F (40°C) flash point

WEDOLiT AS 2603 is a universal, solvent-containing, long-term corrosion protection. It contains a newly formulated thixotropic wax dispersion, which allows a long period of protection under covered storage as well as a limited storage period for outdoor storage. It can be applied by spraying, flooding, brushing or rolling.

Ideal for overseas transport

Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils

After the evaporation of the solvent (quick drying time), a waxy, light-coloured, non-adhesive and non-dust-binding, age-resistant protective film is formed on the treated surface

Good protection for outdoor storage

It´s recommended to homogenise the product before use or after a longer storage period

Protection against atmospheric contaminations such as dissolved gases that cannot penetrate the protective film (water vapour permeability)

High-Protection-DW-Fluid 140°F (60°C) flash point, thin film

WEDOLiT AS-4116 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing of rolling.

Ideal for overseas transport

Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils

Stable against acidic and alkaline contamination

Good material compatibility

Water displacing with very good wetting behavior

Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners

Additive loss due to water contact: Extremely low

Water-miscible High-performance Fluid

WEDOLiT AW 8321 is universally applicable for parts cleaning and corrosion protection. This mineral oil based product is not only suitable for steel, but also for non-ferrous metals. Utilizing the latest technology, AW 8321 offers the possibility for a boron and formaldehyde free application.

The product forms a stable emulsion, regardless of the concentration. Due to the electrolyte and temperature stability, an application in heated baths is possible (recommended temperature 140 - 176°F, (60 - 80°C))

Even at high temperatures the product is stable against contaminations (e.g. sodium sulfonates or phosphates)

Easily removable with solvents or alkaline industrial cleaners

For the corrosion protection it´s important that treated parts are completely dry before packaging. Dependent on the concentration a minimal to slightly noticeable film is formed on the metal surface

Very good compatibility with VCI foils

Outstanding material compatibility (even at higher concentration)

Water-miscible, fully synthetic coolant

WEDOLiT CS 8208 is suitable for ultrasonic testing systems. The product is also suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration of 5 - 10%). Not suitable for the manufacturing of workpieces made of zinc, aluminum and their alloys.

Offers high cooling- and flushing properties with a very good wetting behavior

Contributes to a high tool life

Very good application stability

Almost free of foam

Offers a good skin compatibility

Due to its thermal stability, the product can be used in almost the whole process chain of welded tubes (forming, welding, calibration, sawing)

High performance expander oil

WEDOLiT EP 1090-E is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents the stick-slip- effect due to the high content of polar additives.

Very high film stability (even under high pressures)

Good adhesion properties on smooth surfaces, very good wear protection

Easily removable with water (spontaneous emulsification)

The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be easily separated into water and oily waste by the utilization of specific additives

The treated water can be reused for the preparation of a new emulsion (to a certain degree)

Expander Oil, Easy-splitting Technology, mineral oil based

WEDOLiT EP 540 ES is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and due to the high content of polar additives, prevents the stick-slip-effect.

Very high film stability (even under high pressures)

Good adhesion properties on smooth surfaces, very good wear protection

Easily removable with water (spontaneous emulsification)

The emulsion can be used for pre- and post-cleaning of the pipes and expander heads and can be easily separated into water and oily waste by utilizing specific additives

Due to the unique easy-splitting-technology, only a very small amount of the splitting media is needed

The treated water can be reused for the preparation of a new emulsion (to a certain degree)

Expander oil

WEDOLiT EP 760 E is a highly viscous, high-performance forming oil based on renewable raw materials. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents, due to the high content of polar additives, the stick-slip-effect.

Very high film stability (even under high pressures)

Good adhesion properties on smooth surfaces, very good wear protection

Easily removable with water (spontaneous emulsification)

The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be separated into water and oily waste by the utilization of specific additives

The treated water can be reused for the preparation of a new emulsion (to a certain degree)

High-performance forming oil

WEDOLiT FN 1190-2300 is a highly viscous, chlorine containing forming oil for tube drawing and other cold forming operations of stainless steel. The undiluted product is usually applied by brushes or by means of rollers.

Stable load carrying capacity and a homogenous sliding behavior

Reduces friction and wear and thus contributes to a high tool life

Outstanding wetting ability and film formation without adhesion

Stable cold start behavior, prevents stick-slip and chatter

Leads to clean surfaces and contributes to achieving dimensional accuracy

Easily removable with organic solvents or alkaline industrial cleaners

Soluble in chlorinated hydrocarbons

Chlorine free stamping oil

WEDOLiT FN 4455-55 is a low viscous, water-insoluble lubricant for heavy forming operations of steel and non-ferrous metals. A combination of EP additives offers a outstanding performance for precision cutting operations. The undiluted product is usually applied by spraying, dipping, brushing, or rolling.

Stable load carrying capacity and a homogenous sliding behavior

Reduces friction and wear and thus contributes to a long tool life

Outstanding wetting ability and film formation without adhesion

Stable cold start behavior, prevents stick-slip and chatter

Leads to clean surfaces and contributes to dimensional accuracy

Easily removable with organic solvents or alkaline industrial cleaners

High performance forming oil

WEDOLiT FN 6160-90 is a water-insoluble, chlorinated lubricant for deep drawing and other cold forming operations, e.g. wire drawing, extrusion, or thread forming of steel and stainless steel. The undiluted product is usually applied by flooding, spraying, brushes, or by means of rollers.

Stable load carrying capacity and a homogenous sliding behavior

Reduces friction and wear and thus contributes to a high tool life

Outstanding wetting ability and film formation without adhesion

Stable cold start behavior, prevents stick-slip and chatter

Leads to clean surfaces and contributes to achieve dimensional accuracy

Easily removable with organic solvents or alkaline industrial cleaners

Special forming oil

WEDOLiT FN 8830 is a chlorine free, pasty, water-insoluble lubricant for cold forming processes (e.g. pilgering) of high alloyed steels. The product is usually applied on the outer diameter by brushes or by means of rollers.

Stable load carrying capacity and a homogenous sliding behavior

Reduces friction and wear and thus contributes to a high tool life

The outstanding extreme-pressure properties combined with an exceptional adhesion offers the possibility for high degrees of deformation

Stable cold start behavior, prevents stick-slip and chatter

Contributes to achieving dimensional accuracy

Pigments will remain on the surface after annealing and need to be removed (e.g. by pickling with HCl or HNO₃) before further processing

Solvent base for aluminum stamping 158°F (70°C)

WEDOLiT FS 4710 is a low viscous, solvent-based lubricant for stamping and forming operations of steel, aluminum and non-ferrous metals. The undiluted product is usually applied by spraying, flooding, brushes, or by means of rollers.

Good spreading behavior, which leads to a uniform wetting of the metal surface

Stable load carrying capacity and a homogenous sliding behavior

Reduces friction and wear and thus contributes to a high tool life

Leads to clean surfaces and contributes to achieving dimensional accuracy

If the product is finely dispersed, it evaporates after a short time without leaving any residue. Therefore, an additional cleaning step is not necessary. Otherwise, it is easily removable with organic solvents or alkaline industrial cleaners

Water-soluble, fully synthetic, good material compatibility

WEDOLiT FW 3500 is a high-pressure agent for hydroforming-processes such as internal and external high pressure forming of steel plates, with different surface qualities and thicknesses. The product can also be applied in different grinding and cooling operations.

Approved by “FF Fluid Forming“

Offers very good high-pressure properties

Contributes to a high tool life

Very good application stability

Almost free of foam

Offers very good skin compatibility

Recommended mixing ratio

Hydrofroming:  from 5 - 10%

Grinding:  from 3 - 6%

Water-miscible, fully synthetic coolant for the whole tube welding line

WEDOLiT FW 7651 is suitable for the manufacturing of welded steel tubes. It fulfills the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration of 4 - 6%).

Due to its thermal stability, the product can be used in the whole production line (forming, welding, calibration, sawing)

No emulsification of mineral oils and engine lubricants. Therefore, the application of an anticorrosion oil is possible (e.g. on the Turk’s head of the tube welding engine in the manufacture of profiled tubes)

Can be centrifuged without loss of active substances

Removable with organic solvents or alkaline industrial cleaners

A bright workpiece surface is obtained after annealing

Recommended mixing ratio

Tube welding:  from 4 - 6%

Water-miscible, fully synthetic coolant

WEDOLiT FW 7661 is suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration of 3 - 5%).

Due to its thermal stability, the product can be used in the whole production line (forming, welding, calibration, sawing)

No emulsification of mineral oils and engine lubricants. Therefore, the application of an anticorrosion oil is possible (e.g. on the Turk’s head of the tube welding engine in the manufacturing of profiled tubes)

Can be centrifuged without loss of active substances

Removable with organic solvents or alkaline industrial cleaners

A bright workpiece surface is obtained after annealing

Recommended mixing ratio

Tube welding:  3 -5%

Emulsion for the whole tube welding line

WEDOLiT FW 7840 is suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration from 7%).

The product is approved by Mercedes-Benz Group AG (formerly Daimler AG) (QSO 040305) under the name WEDOLiT K 911.

Due to its thermal stability, the product can be used in the whole production line (forming, welding, calibration, sawing)

Can be centrifuged without loss of active substances

Removable with organic solvents or alkaline industrial cleaners

A bright workpiece surface is obtained after annealing

Recommended mixing ratio

Tube welding:  from 7%

Universal cutting oil

WEDOLiT N 52 is a mineral-oil based high-performance lubricant, suitable for all kinds of minimum quantity lubrication systems such as milling, sawing, or thread forming steel, aluminum, and non-ferrous metals*.
Approved by Rattunde & Co as a cutting oil for minimum quantity lubrication.

Stable load carrying capacity and a homogenous sliding behavior

Very good wetting ability and film formation without adhesion

The outstanding cooling and lubrication properties lead to significantly reduced friction and wear and thus contribute to a long tool life

Leads to clean surfaces and contributes to achieving dimensional accuracy

Economical application

Easily removable with organic solvents or alkaline industrial cleaners

Economical Heavy-duty Spray Cleaner

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

Very economical way to remove heavy soils and light rust

Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)

Can be recycled using XYBEX equipment

Contains no solvents, borates, silicates, nitrites, or amines

Long bath life

Excellent compatibility with magnesium

Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

Washing Compound for Ultrasonic and Immersion Washers

Master STAGES CLEAN 2021 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2021's oil rejecting properties mean longer bath life and economical operation.

Excellent cleaning in immersion and ultrasonic tanks

Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off

An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts

Will provide extended in-process tarnish resistance on copper and copper alloy parts

Safe on aluminum, aluminum alloy, and magnesium

Contains no borates, phenols or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no butyl cellusolve

Will remove coolant residues as well as straight oils

Parts Washing Fluid with Corrosion Inhibitor

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation

An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys

Hard water tolerant, it provides long bath life

Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve

This formula has very low V.O.C. content and no SARA 313 reportable ingredients

Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites

Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem

Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)

Provides short-term corrosion inhibition on cast iron and ferrous alloys

Excellent biostability

Extremely low carryoff keeps operating costs down

Low foam and mist

Very low initial odor level

Exceptional sump life and great tramp oil rejection

Non-butyl Floor and Multi-purpose Cleaner

Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants

Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation

CLEAN F2 has been proven nonirritating to skin at 20% concentration

Excellent choice for use in spray bottles up to 20%

Use for general cleaning tasks and to remove soils from parts and tools

Operators like CLEAN F2's mild, pleasant citrus scent

Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients

Effective mop bucket cleaner

Use in floor scrubber machines

Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

Silicated Low-foam Cleaner

Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

An excellent cleaner and very economical to use

Compatible with aluminum, cast iron, and steel alloys

Rejects oil for easy skimming or centrifuging to extend bath life

Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature

Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

Barium Free, Low Odor, Corrosion Inhibitor

Master STAGES™ NOCOR™ O3T is a barium-free, non-staining, water displacing, thin-fiIm corrosion inhibitor or rust preventative which can be used on a variety of metals. NOCOR O3T provides indoor corrosion inhibition and excellent protection for bearings, precision parts, in-process parts in storage, and parts in transit.

Barium free

Light film for limited carry-off

Excellent corrosion inhibition, generally in excess of three months in dry storage

Non-staining

Water displacing to help prevent rust due to water trapped under the protective film

Oxidation resistant to resist tarnishing over long storage periods

Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"

Humidity Cabinet Test: No rust at 176 hours (ASTM D1748)

Barium Free, Low Odor, Corrosion Inhibitor

Master STAGES™ NOCOR™ O6T is a barium-free, non-staining, water displacing, thin-fiIm corrosion inhibitor or rust preventative which can be used on a variety of metals. NOCOR O6T provides indoor corrosion inhibition and excellent protection for bearings, precision parts, in-process parts in storage, and parts in transit.

Barium free

Light film for limited carry-off

Excellent corrosion inhibition, generally in excess of six months in dry storage

Non-staining

Provides cleaning action

Water displacing to help prevent rust due to water trapped under the protective film

Oxidation resistant to resist tarnishing over long storage periods

Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"

Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)

All-purpose Cleaner

Master STAGES™ Task2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.

Use full strength or dilute

Versatile all-around shop cleaner

Pratt Whitney Aerospace Approval PMC 1455-11

Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate

Very low V.O.C. content, and conductivity

Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)

Will not harm TRIM metalworking fluids

Machine Tool Sump and System Cleaner

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

A very specialized formula that draws many years of hands-on experience in machine clean outs

Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system

Very hard water tolerant allowing it to be effective in raw water or used coolant

Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients

When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue

Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Positive Displacement Proportioner

The HYDRO-BLEND 6180 is a water-driven, positive displacement proportioner, which dispenses coolant on demand at the desired concentration.

• Concentration control
• Reduces concentrate waste
• Easy to install
• Reliable and consistent
• Nonelectrical
• Adjustable

For Sump Cleaning

Removing spent coolants, waste fluids, or oils from machine sumps, reservoirs, or storage tanks is usually just plain bothersome. Inexpensive vacuums will not do a satisfactory job, are quite loud, and are not built for the industrial environment. Now, the Reversible LIQUI-VAC™ provides the solution to your sump cleaning problems. It is small enough to fit in your hand, yet it sucks up tramp oils, used oils, and waste coolants fast and simple. This unit will also discharge fluids out of the drum into a separate container if desired with just the turn of a knob.

Features

• operates on shop air
• attaches to small bung on a standard drum
• has one moving part
• requires no maintenance
• has whisper quiet exhaust

The Reversible LIQUI-VAC™ comes in a kit that includes everything you need to start using it the very first day. The standard kit includes:

• venturi unit
• 1" x 10' (38mm. X 3 mL) suction hose
• drum standpipe adapter
• quick disconnect fittings
• air control valve
• safety shut-off valve
• aluminum wand

Portable Centrifuge

The Mini TOT is a compact, portable, high-speed centrifuge, tramp oil separator that is perfect for small metalworking plants.

The Mini TOT processes watermiscible coolants and aqueous cleaners, removing free and emulsified tramp oil to produce clean, reusable coolant and cleaners. Removing tramp oil (hydraulic oil, way lubes, or any undesirable oil) from coolant and cleaners eliminates a food source for bacteria, reduces undesirable residues, and reduces smoke and oil mist in the shop atmosphere.

compact and portable for machine tool sumps and parts washers

simple operation

high-speed, disc-bowl centrifuge

stainless steel bowl

built-in clean fluid centripetal discharge pump

easy dismantling of bowl for cleaning

quick disconnects on feed and discharge

strainer and 50-micron cleanable prefilter

air pump and floating skimmer for feed

automatic shut-off when tramp oil collection tank is full

Laboratory Precision in the Palm of Your Hand!

The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision, but laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer.

The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button. The custom-designed microprocessor delivers a nearly instantaneous readout in degrees Brix. Nonlinear temperature compensation is automatic and insures that fluids read between 0°C and 50°C (32°F to 122°F) are measured accurately.

The large LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options.

Calibration is automatic and does not require the use of special calibration solutions, or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.

Portable Centrifuge Unit for Removing Emulsified Tramp Oils

Developed to meet the needs of the small metalworking plant for a compact, portable, high-speed centrifuge, tramp oil separator, the Tramp Oil Terminator™ will process both water-miscible coolants and aqueous cleaners to remove free and emulsified tramp oils, providing clean and reusable coolants and cleaners. Removing tramp oils (hydraulic oils, way lubes or any undesirable oil) from coolants and cleaners removes a food source for bacteria, reduces undesirable residues, and reduces smoke and oil mist in the shop atmosphere.

Benefits

• Extended life of coolants and cleaners
• Improved machining
• Longer tool life

Features

• Compact and portable for machine tool sumps and parts washers
• Simple operation
• High-speed, disc-bowl centrifuge
• Stainless-steel hood and bowl
• Built-in clean fluid centripetal discharge pump
• Easy dismantling of bowl for cleaning
• Quick disconnects on feed and discharge
• Strainer and 50 micron cleanable pre-filter
• Air pump and floating skimmer for feed
• Automatic shut off when tramp oil collection tank is full

Chip & Sludge Remover

A perfect match-up with the PurifierPlus is the XYBEX ChipOut. It is also a compact, easy-to-use, affordable solution for optimizing production. It simply and effectively sucks out the coolant, chips, and swarf to collect and filter all solid impurities and return clean coolant to the tank.

Get the most from your coolant with ChipOut. It literally pays for itself in no time with significant cost savings.

XYBEX ChipOut

• Separates surface debris, bottom chips and swarf, and sediment from coolant
• Extends coolant life
• Improves surface finish on parts
• Reduces maintenance
• Uses diaphram pump air pressure, no electricity required
• High suction power, flow rate of 180 liters/min
• Runs during production without shutting off machine tools
• Adjustable stainless steel filters: standard mesh 380 microns; optional: 830 microns and 180 microns
• Optional floating device for maximum tramp oil collection
• Portable and easy to use with multiple machines
• Operates with water-soluble coolants or neet oils

Cost effective ChipOut adds up to big savings

• Reduces annual coolant cost
• Reduces expensive parts rejects
• Reduces maintenance to a minimum

Magnetic Centrifugal Sludge & Chip Remover

Looking for a fast, affordable way to have longer coolant life, reduce maintenance, and achieve better machinability and surface finish? Hardworking ChipOut Plus delivers all that and more in a compact, portable system that can hook up to machines throughout the shop.

It does double time, as both a centrifugal and magnetic separator for water-based cutting fluids or neat oils. It’s simple to use, powerful, and efficient.

First, the suction hose draws in the liquid and impurities. The filtration bucket traps large impurities before the sludge-containing fluid enters the centrifugal separator where fine particles are separated out by centrifugal force. The sludge then enters the powerful magnetic separator which efficiently removes magnetic metallic shavings and particles. Just like its name implies, it takes out chips - plus more!

XYBEX ChipOut Plus

• Separates surface debris, magnetic dust and shavings, chips, swarf, and sediment from coolant
• Extends coolant life
• Improves surface finish on parts
• Reduces maintenance
• Separates using centrifugal and magnetic force
• Provides extremely fine filtration
• No need to stop the machine
• Quick filtration, easy to operate
• Portable, use with multiple machines
• No consumables needed

Use hardworking, cost effective ChipOut Plus to reduce costs and build profits
Save time and build up profits with ChipOut Plus.

• Reduces annual coolant cost
• Reduces maintenance and manpower
• Reduces costly parts rejects

Peak Performance Unleashed with Venturi Mixer!

Optimize Performance: XYBEX™ Master Blend Venturi Coolant Mixer!

• Built to last with high durability: crafted from billet 6061 Aluminum
• Chemically resistant surface treatment ensures longevity
• Enhanced control with a double-lock dial system
• Versatile mounting options: compatible with both drums and pails
• Suited for metalworking fluids, including soluble and semi-synthetic
• Ensures precision and consistency in concentration mixtures
• Powered by water, eliminating the need for electricity
• Minimized downtime for increased productivity

Boost Productivity with Fast Tramp Oil & Coolant Waste Removal

Discover the XYBEX™ Master Vac: Your Ultimate Solution for Effortless Fluid Removal and Refill!

• Powered by pneumatic compressed air for seamless operation
• Engineered to fit standard 205L drums, ensuring compatibility
• Experience whisper-quiet performance with minimal maintenance requirements
• Achieve unparalleled efficiency with a high suction rate of 45L/MIN at 50 PSI

Upgrade your operations today with the XYBEX Master Vac!

Cutting Fluid Purifying System

The portable, cost-effective XYBEX PurifierPlus system pays for itself with material cost savings, reduced downtime and recycling costs. Not only does it enhance production and make the workplace cleaner, it also is better for employee health and the environment.

Unlike units which simply separate machine tramp oil (the unwanted byproduct of the machining/metalworking process) from coolant, PurifierPlus has an ozone disinfection function which kills bacteria. Not only is the coolant cleaned and lasts longer, it’s purified and reused, and the subsequent problematic stench from bacteria and fungal growth is eliminated.

Improve production, reduce costs, and experience a cleaner workplace with PurifierPlus.

XYBEX PurifierPlus

• Separates free tramp oil and extends coolant life
• Reduces tool wear and costly parts rejects
• Easy to use with a handy set-timer to operate on its own
• Adjustable flow rate filter from 10 to 30 liters/hr
• Kills bacteria (for best results run 1 hour for each 100 liters in sump; ozone function disinfects at 500 mg/hr)
• Built-in pH detector (optional) adjusts pH to control range
• Portable for use on multiple machines in the facility

PurifierPlus quickly pays for itself in savings

• Saves 10% to 25% on annual coolant cost
• Saves 30% to 50% on additional water cost
• Saves 10% to 25% on tooling costs and part reworks
• Reduces clean-up time 60% to 80% annually

The Li'l Sucker™ is the newest addition to the Yellow Bellied Sump Sucker™ line of sump cleaning vacuums. Based on extensive customer research and extended field trial experience, customers were able to tell us what they liked, disliked, felt had no value, and would change in the previous designs. The result was the Yellow Bellied Sump Sucker that customers designed. It is durable, highly maneuverable, easy to use, and provides exceptional suction and discharge flow rates.

• Removes the coolant, sludge, and chips from the sump
• Filters the sludge and chips from the fluid
• Returns filtered coolant to the machine tool sump, or
• Transports the coolant to waste treatment for disposal, or to a XYBEX Recycling System for recycling

Features

• Tank capacity of 50 gallons (190 liters)
• Suction rate up to 85 GPM (320 LPM)
• Discharge rate up to 40 GPM (150 LPM)
• 1.6 ft³ (45 dm³) chip basket holding capacity, roughly 12 gallons (45 liters)
• Available in both air venturi and electric models
• 120 VAC, single phase, 50 Hz/60 Hz electric model standard
• 220 VAC, single phase, 50 Hz/60 Hz electric model optional
• Complete with hoses and straight cleaning tool
• Optional cleaning tools available
• Perfect for today's smaller machine tool sumps