Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support
TRIM TC 253
Description Application Guidelines Properties Ordering Information Additional Information
SDS (Customer Member Login) Data Sheet
Brochures
Case Studies
Technical Bulletins
Technical Articles
Tech Tips
Press Releases
Documents
Videos
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM® TC 253

Straight Cutting Oil Defoamer

TRIM<sup>®</sup> TC 253 - 2 quart tip"N" measure<sup>®</sup>

Application Guidelines

  • Start by adding 6 ounces of TC 253 per 100 gallons of solution to lower foam. You may find that using less than this will be effective in your system.
  • Stir well before adding. For best results, premix TC 253 with straight oil working solution until it is thoroughly mixed in. This mixture should be added just up-stream from the foam.
  • The maximum amount of TC 253 in the system should not exceed 32 ounces per one hundred gallons of straight oil metalworking fluid. Using too much TC 253 can cause foam and/or form a residue on the machine, parts, or tools.
  • Do not freeze or store above 125°F.
  • Not intended for parts that are to be painted or plated.
  • DO NOT mix with water soluble metalworking fluids.
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/na/en-us/distributors/index.php, your District Sales Manager, or call our Tech Line at 1-800-537-3365.

TRIM® TC 253   
©2018-2024 Master Fluid Solutions®