Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support
TRIM TC 184B
Description Application Guidelines Properties Ordering Information Additional Information
SDS (Customer Member Login) Data Sheet
Brochures
Case Studies
Technical Bulletins
Technical Articles
Tech Tips
Press Releases
Documents
Videos
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM® TC 184B

Nonsilicone Antifoam

TRIM<sup>®</sup> TC 184B - 2 quart tip"N" measure<sup>®</sup>

Application Guidelines

  • The maximum add rate is one gallon per 1000 gallons of sump volume. You may find that using less than this will be effective in your system.
  • For best results, pre-mix TC 184B with working solution until it is water-thin. This mixture should then be added just up-stream from the foam.
  • Spraying pre-mixed TC 184B directly onto the foam will knock it down quickly.
  • Using too much TC 184B can cause increased foam and/or form a residue on the machine parts or tools.
  • Shake or stir well before adding. If you make a dilution with working solution, shake or stir that mixture also before adding.
  • Do not freeze or store above 115°F.
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/na/en-us/distributors/index.php, your District Sales Manager, or call our Tech Line at 1-800-537-3365.

TRIM® TC 184B   
©1998-2024 Master Fluid Solutions®