Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support
TRIM TC 109
Description Application Guidelines Properties Ordering Information Additional Information
Health and Safety Data Sheet
Brochures
Case Studies
Technical Bulletins
Technical Articles
Tech Tips
Press Releases
Documents
Videos
Logo - TRIM™ wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM™ wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM™ TC 109

Silicone Free, Tank Side Defoamer

Application Guidelines

  • The maximum add rate is one gallon per 1000 gallons (1 liter per 1000 liters) of sump volume. You may find that using less than this will be effective in your system.
  • For best results, pre-mix TC 109 with working solution until it is water-thin. This mixture should then be added just up-stream from the foam.
  • Spraying pre-mixed TC 109 directly onto the foam will knock it down quickly.
  • Using too much TC 109 can cause increased foam and/or form a residue on the machine parts or tools.
  • Shake or stir well before adding. If you make a dilution with working solution, shake or stir that mixture also before adding.
  • Do not freeze or store above 115°F (46°C).
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/ap/en-ap/distributors/index.php, your District Sales Manager, or email us at [email protected].

TRIM™ TC 109   
©2024 Master Fluid Solutions™