New Products

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

• Very low foam and mist
• Provides excellent corrosion inhibition on all common ferrous alloys
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
• Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
• Extremely low carryoff for very low total operation costs
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odor which dissipates further after one or two days
• Minimizes the buildup of sticky residues

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminium alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM™ SC310BC is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310BC is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM SC445 is a semichemical cutting and grinding fluid concentrate. SC445 provides excellent cooling and good corrosion protection. This product contains a chemical surface active agent for providing good lubrication. SC445 can be used for a wide range of high-speed turning and grinding operations. SC445 leaves a thin layer of water soluble oil as residue.

• Compatible with a very wide range of materials including: cast iron, steels, and copper alloys as well as plastics and composites
• Provides excellent corrosion and rust inhibition on ferrous alloys, preventing clinkering problems of cast iron chips in machining
• Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
• Long sump life and low coolant consumption that reduce the cost for user
• Low odor and mist provides a good working environment
• Chlorine-free product
• Easy recycling or disposal with conventional techniques and equipment
• Compatible with the TRIM MicroSol and other high oil semisynthetic products
• Works very well in general machining where a more traditional soluble oil may not cool sufficiently

TRIM SC9030 is a high-oil semisynthetic coolant. This product provides the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. TRIM SC9030 is well suited for general high-speed machining and grinding of all materials and it leaves soluble emulsion oil as residue.

• Compatible with a very wide range of materials including cast iron, steels, copper, aluminum alloys, and many plastics and composites
• Provides superior corrosion inhibition on cast iron and other ferrous and nonferrous materials; and eliminates the "hot chip" and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Easy recycling or disposal with conventional techniques and equipment

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides good operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Good hard water tolerance
• Works very well in general machining where traditional soluble oil may not cool sufficiently.
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut
• Good balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with most aluminum, steel, cast iron and brass material
• High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Good cleaning performance keeps machine tools clean
• Easy recycling or disposal by using conventional techniques and equipment

TRIM GRIND WCS minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving "G RATIOS" and reducing grinding forces. GRIND WCS is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.

• PRTR compliant
• Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems
• Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks
• Is not stripped out by conventional filtration systems
• Operators like GRIND WCS’s clear working solution for superior visibility while grinding
• Exceptional sump life and good tramp oil rejection for easy skimming
• Resists oxidation and varnishing
• Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines
• Very low carryoff equals low fluid makeup costs
• Easy recycling or disposal with conventional techniques and equipment

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM E206KS is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E206KS makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Extremely hard water tolerance
• Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
• Provides good tool life and surface finishes
• High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Coolant residue is easily removed with either water, working solution or aqueous cleaners
• Good cleaning performance keeps machine tool very clean
• Easy recycling or disposal with conventional techniques and equipment
• Run effectively for long periods without the need for costly additives

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Low foaming for modern high-pressure, high-volume applications
• Uses standard metalworking recycling and disposal techniques
• Does not contain any chemical listed under Japan PRTR regulation
• Provides superior corrosion inhibition on all ferrous metals

TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after one-to-two days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C115RT is a high-performance synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool. It can be also used as a steel tube pressure test fluid.

• Compatible with a very wide range of materials including cast iron, steels, plastics and composites
• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after 1-2 days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270II is a state-of-the-art synthetic coolant. C270II provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness. TRIM C270II meets the needs of the modern job shop which benefits from a single premium synthetic coolant to preform virtually all its machining operations.

• Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• A very low initial odor level which usually disappears after 1-2 days
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts; this residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection

TRIM C276WP is a synthetic coolant concentrate which operates at very high fluid pressures and volumes with little or no foam. TRIM C276WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C276WP has superior cooling, rust prevention and chip settling characteristics of a premium synthetic product combined with excellent compatibility with sensitive aluminium alloys.

• Very stable formula provides long operational life with consistent performance
• Extremely low foam in mineral free water
• Excellent compatibility with sensitive aluminium alloys
• Excellent tramp oil rejection
• Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easy recycling or disposal with conventional techniques and equipment

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Very wide application range, suitable for both grinding and machining
• Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
• In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with aluminum, steel alloys, cast iron, and yellow metals
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Does not contain or test positive for phenol
• Will run effectively for long periods without the need for costly additives

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminum alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

• Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
• Low foaming in most operations
• Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
• Will provide superior sump life and corrosion inhibition for long periods of time without adds
• Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron
• Will keep the machine and work environment clean even when machining or grinding gray iron
• Contains no chlorine or sulfur-based additives
• Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
• Very low carryoff and long sump life, delivering low operating costs
• Hard water tolerant up to 30 grains

TRIM SC538 a high-performance semisynthetic coolant. Provides superior aluminum machinability, boundary lubrication, and produces a very high quality surface finish. Can also be utilized for ferrous and non-ferrous metal materials, stainless steel, and aerospace alloy materials. SC538 has good lubricity and friction reducing qualities in high-speed cutting and grinding applications.

• Provides superior aluminum machinability
• Very high quality surface finish
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Low odor and mist makes for an operator friendly product
• Easy recycling and disposal with conventional techniques and equipment

TRIM SC639 is a general purpose semisynthetic cutting and grinding fluid concentrate which provides an excellent balance between cooling and lubricity. SC639 has very good corrosion protection for both ferrous and non-ferrous metal, and can be used for a wide range of high-speed turning and grinding operations. SC639 leaves a thin layer of water soluble oil residue that provides extra protection to the machine tools parts while keeping the machine clean.

• Provides excellent lubricity for various machining applications
• Provides excellent corrosion and rust inhibition on ferrous and nonferrous alloys, preventing clinkering problems of cast iron chips in machining
• Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
• Long sump life and low coolant consumption that reduce the cost for user
• Low odor and mist that provides a good working environment
• Good hard water tolerance up to 40 grain
• Easy recycling or disposal with conventional techniques and equipment