Synthetic

TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

Does an excellent job in most glass, ceramic, and composite grinding applications

Excellent corrosion inhibition on most common ferrous and nonferrous alloys

Extremely low carryoff keeps operating costs down

Low foam and mist

Very low initial odor level which usually disappears after one-to-two days

Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts

Exceptional sump life and very good tramp oil rejection

Synthetic

TRIM C115RT is a high-performance synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool. It can be also used as a steel tube pressure test fluid.

Compatible with a very wide range of materials including cast iron, steels, plastics and composites

Does an excellent job in most glass, ceramic, and composite grinding applications

Excellent corrosion inhibition on most common ferrous and nonferrous alloys

Extremely low carryoff keeps operating costs down

Low foam and mist

Very low initial odor level which usually disappears after 1-2 days

Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts

Exceptional sump life and very good tramp oil rejection

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites

Provides excellent corrosion inhibition on all common ferrous alloys

Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives

Extremely low carryoff for very low total operation costs

Very low foam and mist

Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips

Exceptional sump life and very good tramp oil rejection

A very low initial odor level which usually disappears after one-to-two days

Cutting and Grinding Fluid Concentrate

TRIM C270II is a state-of-the-art synthetic coolant. C270II provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness. TRIM C270II meets the needs of the modern job shop which benefits from a single premium synthetic coolant to preform virtually all its machining operations.

Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys

Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur based EP additives

Extremely low carryoff for very low total operation costs

Very low foam and mist

A very low initial odor level which usually disappears after 1-2 days

Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts; this residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips

Exceptional sump life and very good tramp oil rejection

Clean-running Synthetic

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

Very low foam and mist

Provides excellent corrosion inhibition on all common ferrous alloys

Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning

Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations

Extremely low carryoff for very low total operation costs

Exceptional sump life and very good tramp oil rejection

Low initial charge odor which dissipates further after one or two days

Minimizes the buildup of sticky residues

Cutting and Grinding Fluid Concentrate

TRIM C276WP is a synthetic coolant concentrate which operates at very high fluid pressures and volumes with little or no foam. TRIM C276WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C276WP has superior cooling, rust prevention and chip settling characteristics of a premium synthetic product combined with excellent compatibility with sensitive aluminium alloys.

Very stable formula provides long operational life with consistent performance

Extremely low foam in mineral free water

Excellent compatibility with sensitive aluminium alloys

Excellent tramp oil rejection

Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut

Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures

Easy recycling or disposal with conventional techniques and equipment

Economical Synthetic Fluid for Aluminum Machining

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000

Water-clear, low-foaming and -misting, C290 is a joy to work with and manage

Provides good results in a wide range of grinding and machining operations

Excellent tramp oil rejection

Easily removed from parts for easy cleanup before assembly, painting, or plating operations

PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone

Very low carryoff and long sump life results in low operating cost

Long-life Emulsion

TRIM E206KS is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E206KS makes it a first choice for high-quality, consistent parts manufacturing.

Very stable formula provides long operational life with consistent performance

Has a very wide application range allowing its effective use on cutting and grinding

Extremely hard water tolerance

Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut

Provides good tool life and surface finishes

High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled

Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures

Coolant residue is easily removed with either water, working solution or aqueous cleaners

Good cleaning performance keeps machine tool very clean

Easy recycling or disposal with conventional techniques and equipment

Run effectively for long periods without the need for costly additives

Long-life Emulsion

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

Very stable formula provides long operational life with consistent performance

Extremely hard water tolerant

Very wide application range, suitable for both grinding and machining

Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut

In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes

Compatible with aluminum, steel alloys, cast iron, and yellow metals

Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures

Coolant is easily removed with water, working solution, or aqueous cleaners

Easy recycling or disposal with conventional techniques and equipment

Does not contain or test positive for phenol

Will run effectively for long periods without the need for costly additives

Long-life Emulsion

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

Very stable formula provides good operational life with consistent performance

Has a very wide application range allowing its effective use on cutting and grinding

Good hard water tolerance

Works very well in general machining where traditional soluble oil may not cool sufficiently.

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Good balance of cooling and lubrication to provide good tool life and surface finishes

Compatible with most aluminum, steel, cast iron and brass material

High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled

Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures

Good cleaning performance keeps machine tools clean

Easy recycling or disposal by using conventional techniques and equipment

Low-foam, High-lubricity Emulsion

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

Very wide application range

Good hard water tolerance

Keeps machine tools clean

Works very well in general machining

Very stable formula provides good operational life with consistent performance

High tramp oil resistance for easy oil removal and longer coolant life

Easily recycled or disposed of using conventional techniques and equipment

Good balance of cooling and lubrication providing good tool life and surface finishes

Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Premium Universal Emulsion

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

Very wide application range

Good hard water tolerance

Keeps machine tools clean

Works very well in general machining

Very stable formula provides good operational life with consistent performance

High tramp oil resistance for easy oil removal and longer coolant life

Easily recycled or disposed of using conventional techniques and equipment

Good balance of cooling and lubrication providing good tool life and surface finishes

Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures

Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

Boron Free - Carbide Grinding Synthetic

TRIM GRIND WCS minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving "G RATIOS" and reducing grinding forces. GRIND WCS is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.

PRTR compliant

Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems

Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks

Is not stripped out by conventional filtration systems

Operators like GRIND WCS’s clear working solution for superior visibility while grinding

Exceptional sump life and good tramp oil rejection for easy skimming

Resists oxidation and varnishing

Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines

Very low carryoff equals low fluid makeup costs

Easy recycling or disposal with conventional techniques and equipment

Low-foam Ferrous Semisynthetic

TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

Low foaming for today's demanding high-pressure, high-volume applications

Also for machining some aluminum alloys and nonferrous metals

Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Requires no special disposal or recycling

Low-foam Ferrous Semisynthetic

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

Low foaming for today's demanding high-pressure, high-volume applications

Also for machining some aluminium alloys and nonferrous metals

Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Requires no special disposal or recycling

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

Dramatically extends useful life without the need for tank-side biocides or fungicides

Low foaming for todays demanding high-pressure, high-volume applications

Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites

Optimized combination of cooling and lubricity for titanium machining applications

Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives

Provides superior corrosion inhibition on all ferrous and nonferrous metals

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Uses standard metalworking recycling and disposal techniques

Premium High-lube PRTR Microemulsion

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys

Greatly extends useful life without the need for tank side biocides or fungicides

Low foaming for modern high-pressure, high-volume applications

Uses standard metalworking recycling and disposal techniques

Does not contain any chemical listed under Japan PRTR regulation

Provides superior corrosion inhibition on all ferrous metals

High-lubricity, Low-foam Premium Semisynthetic

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

Dramatically extends useful life without the need for tank-side biocides or fungicides

Boron and halogen free

Low foaming for todays demanding high-pressure, high-volume applications

Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys

Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys

Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives

Provides superior corrosion inhibition on all ferrous and nonferrous metals

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Uses standard metalworking recycling and disposal techniques

Microemulsion Semisynthetic

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites

Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Has exceptional sump life and very low makeup for extremely low total operating cost

Low odor and mist makes for an operator-friendly product

Extremely effective EP additive package

Contains no nitrites, heavy metals, phenolic compounds

Easy recycling or disposal with conventional techniques and equipment

Microemulsion Semisynthetic - Brown Color

TRIM™ SC310BC is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310BC is well-suited for general, high-speed machining and grinding of all materials.

Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites

Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Has exceptional sump life and very low makeup for extremely low total operating cost

Low odor and mist makes for an operator-friendly product

Extremely effective EP additive package

Contains no nitrites, heavy metals, phenolic compounds

Easy recycling or disposal with conventional techniques and equipment

Chlorine-free Semisynthetic Coolant

TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil

Low foaming in most operations

Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material

Will provide superior sump life and corrosion inhibition for long periods of time without adds

Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron

Will keep the machine and work environment clean even when machining or grinding gray iron

Contains no chlorine or sulfur-based additives

Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable

Very low carryoff and long sump life, delivering low operating costs

Hard water tolerant up to 30 grains

Low-oil Semisynthetic Coolant

TRIM SC445 is a semichemical cutting and grinding fluid concentrate. SC445 provides excellent cooling and good corrosion protection. This product contains a chemical surface active agent for providing good lubrication. SC445 can be used for a wide range of high-speed turning and grinding operations. SC445 leaves a thin layer of water soluble oil as residue.

Compatible with a very wide range of materials including: cast iron, steels, and copper alloys as well as plastics and composites

Provides excellent corrosion and rust inhibition on ferrous alloys, preventing clinkering problems of cast iron chips in machining

Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance

Long sump life and low coolant consumption that reduce the cost for user

Low odor and mist provides a good working environment

Chlorine-free product

Easy recycling or disposal with conventional techniques and equipment

Compatible with the TRIM MicroSol and other high oil semisynthetic products

Works very well in general machining where a more traditional soluble oil may not cool sufficiently

High-performance Semisynthetic Fluid

TRIM SC538 a high-performance semisynthetic coolant. Provides superior aluminum machinability, boundary lubrication, and produces a very high quality surface finish. Can also be utilized for ferrous and non-ferrous metal materials, stainless steel, and aerospace alloy materials. SC538 has good lubricity and friction reducing qualities in high-speed cutting and grinding applications.

Provides superior aluminum machinability

Very high quality surface finish

Has exceptional sump life and very low makeup for extremely low total operating cost

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Low odor and mist makes for an operator friendly product

Easy recycling and disposal with conventional techniques and equipment

General Purpose Semisynthetic

TRIM SC639 is a general purpose semisynthetic cutting and grinding fluid concentrate which provides an excellent balance between cooling and lubricity. SC639 has very good corrosion protection for both ferrous and non-ferrous metal, and can be used for a wide range of high-speed turning and grinding operations. SC639 leaves a thin layer of water soluble oil residue that provides extra protection to the machine tools parts while keeping the machine clean.

Provides excellent lubricity for various machining applications

Provides excellent corrosion and rust inhibition on ferrous and nonferrous alloys, preventing clinkering problems of cast iron chips in machining

Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance

Long sump life and low coolant consumption that reduce the cost for user

Low odor and mist that provides a good working environment

Good hard water tolerance up to 40 grain

Easy recycling or disposal with conventional techniques and equipment

High-lubricity Semisynthetic

TRIM SC9030 is a high-oil semisynthetic coolant. This product provides the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. TRIM SC9030 is well suited for general high-speed machining and grinding of all materials and it leaves soluble emulsion oil as residue.

Compatible with a very wide range of materials including cast iron, steels, copper, aluminum alloys, and many plastics and composites

Provides superior corrosion inhibition on cast iron and other ferrous and nonferrous materials; and eliminates the "hot chip" and clinkering problems often seen when machining cast iron

Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

Has exceptional sump life and very low makeup for extremely low total operating cost

Low odor and mist makes for an operator-friendly product

Easy recycling or disposal with conventional techniques and equipment

Washing Compound for Ultrasonic and Immersion Washers

Master STAGES CLEAN 2021 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2021's oil rejecting properties mean longer bath life and economical operation.

Excellent cleaning in immersion and ultrasonic tanks

Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off

An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts

Will provide extended in-process tarnish resistance on copper and copper alloy parts

Safe on aluminum, aluminum alloy, and magnesium

Contains no borates, phenols or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no butyl cellusolve

Will remove coolant residues as well as straight oils

Parts Washing Fluid with Corrosion Inhibitor

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation

An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys

Hard water tolerant, it provides long bath life

Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve

This formula has very low V.O.C. content and no SARA 313 reportable ingredients

Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites

Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem

Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)

Provides short-term corrosion inhibition on cast iron and ferrous alloys

Excellent biostability

Extremely low carryoff keeps operating costs down

Low foam and mist

Very low initial odor level

Exceptional sump life and great tramp oil rejection

Machine Tool Sump and System Cleaner

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

A very specialized formula that draws many years of hands-on experience in machine clean outs

Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system

Very hard water tolerant allowing it to be effective in raw water or used coolant

Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients

When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue

Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Laboratory Precision in the Palm of Your Hand!

The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision, but laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer.

The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button. The custom-designed microprocessor delivers a nearly instantaneous readout in degrees Brix. Nonlinear temperature compensation is automatic and insures that fluids read between 0°C and 50°C (32°F to 122°F) are measured accurately.

The large LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options.

Calibration is automatic and does not require the use of special calibration solutions, or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.

Effectively Remove Oil from Coolants and Washing Solutions

Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.

Tramp oil contributes to the growth and formation of:

• coolant-destroying bacteria
• undesirable residues on machine tools and workpieces
• smoke and oil mist in shop atmospheres

These problems result in:

• shortened coolant life
• poor material removal rates
• poor surface finish and size control
• decreased tool and wheel life

Numerous devices ("floating ropes," wheels, and belts) have been developed over the years to remove "free floating" tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either "troublesome," high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations.

As a "belt-type" skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER Jr. uses the same "oil loving" belt, but uses a more compact scraper blade to strip the separated oil from the belt.

Features

• 115 volt, single phase, 50/60 Hz
• heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt, single phase, 50 Hz also available)
• open, accessible oil-collecting tray with a convenient drain connector
• "oil loving" oleophilic belt (purchased separately)
• heavy-duty steel construction, with industrial-grade enamel paint

Benefits

• fast, simple belt changing
• low maintenance
• lower hang roller that will not fall off in the machine sump even in turbulent conditions

Options

• dewatering tray
• portable kit
• special length belts available on special order
• special belt materials available for high temperature or pH applications on special order

SCROUNGER Jr Belts

• all belts 1" [25mm] wide
• 24" [610mm]
• 32" [815mm]
• 44" [1120mm]

Effectively Remove Oil from Coolants and Washing Solutions

Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.

Tramp oil contributes to the growth and formation of:

• coolant-destroying bacteria
• undesirable residues on machine tools and workpieces
• smoke and oil mist in shop atmospheres

These problems result in:

• shortened coolant life
• poor material removal rates
• poor surface finish and size control
• decreased tool and wheel life

Numerous devices ("floating ropes," wheels, and belts) have been developed over the years to remove "free floating" tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either "troublesome," high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations.

As a "belt-type" skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER Jr. uses the same "oil loving" belt, but uses a more compact scraper blade to strip the separated oil from the belt.

Features

• 115 volt, single phase, 50/60 Hz
• heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt, single phase, 50 Hz also available)
• open, accessible oil-collecting tray with a convenient drain connector
• "oil loving" oleophilic belt (purchased separately)
• heavy-duty steel construction, with industrial-grade enamel paint

Benefits

• fast, simple belt changing
• low maintenance
• lower hang roller that will not fall off in the machine sump even in turbulent conditions

Options

• dewatering tray
• portable kit
• special length belts available on special order
• special belt materials available for high temperature or pH applications on special order

SCROUNGER Belts (purchased separately)

• all belts 3" [76mm] wide
• two foot hang: total length 70" [1780mm]
• three foot hang: total length 94" [2390mm]
• four foot hang: total length 118" [3000mm]
• six foot hang: total length 166" [4220mm]

Chip & Sludge Remover

A perfect match-up with the PurifierPlus is the XYBEX ChipOut. It is also a compact, easy-to-use, affordable solution for optimizing production. It simply and effectively sucks out the coolant, chips, and swarf to collect and filter all solid impurities and return clean coolant to the tank.

Get the most from your coolant with ChipOut. It literally pays for itself in no time with significant cost savings.

XYBEX ChipOut

• Separates surface debris, bottom chips and swarf, and sediment from coolant
• Extends coolant life
• Improves surface finish on parts
• Reduces maintenance
• Uses diaphram pump air pressure, no electricity required
• High suction power, flow rate of 180 liters/min
• Runs during production without shutting off machine tools
• Adjustable stainless steel filters: standard mesh 380 microns; optional: 830 microns and 180 microns
• Optional floating device for maximum tramp oil collection
• Portable and easy to use with multiple machines
• Operates with water-soluble coolants or neet oils

Cost effective ChipOut adds up to big savings

• Reduces annual coolant cost
• Reduces expensive parts rejects
• Reduces maintenance to a minimum

Magnetic Centrifugal Sludge & Chip Remover

Looking for a fast, affordable way to have longer coolant life, reduce maintenance, and achieve better machinability and surface finish? Hardworking ChipOut Plus delivers all that and more in a compact, portable system that can hook up to machines throughout the shop.

It does double time, as both a centrifugal and magnetic separator for water-based cutting fluids or neat oils. It’s simple to use, powerful, and efficient.

First, the suction hose draws in the liquid and impurities. The filtration bucket traps large impurities before the sludge-containing fluid enters the centrifugal separator where fine particles are separated out by centrifugal force. The sludge then enters the powerful magnetic separator which efficiently removes magnetic metallic shavings and particles. Just like its name implies, it takes out chips - plus more!

XYBEX ChipOut Plus

• Separates surface debris, magnetic dust and shavings, chips, swarf, and sediment from coolant
• Extends coolant life
• Improves surface finish on parts
• Reduces maintenance
• Separates using centrifugal and magnetic force
• Provides extremely fine filtration
• No need to stop the machine
• Quick filtration, easy to operate
• Portable, use with multiple machines
• No consumables needed

Use hardworking, cost effective ChipOut Plus to reduce costs and build profits
Save time and build up profits with ChipOut Plus.

• Reduces annual coolant cost
• Reduces maintenance and manpower
• Reduces costly parts rejects

Cutting Fluid Purifying System

The portable, cost-effective XYBEX PurifierPlus system pays for itself with material cost savings, reduced downtime and recycling costs. Not only does it enhance production and make the workplace cleaner, it also is better for employee health and the environment.

Unlike units which simply separate machine tramp oil (the unwanted byproduct of the machining/metalworking process) from coolant, PurifierPlus has an ozone disinfection function which kills bacteria. Not only is the coolant cleaned and lasts longer, it’s purified and reused, and the subsequent problematic stench from bacteria and fungal growth is eliminated.

Improve production, reduce costs, and experience a cleaner workplace with PurifierPlus.

XYBEX PurifierPlus

• Separates free tramp oil and extends coolant life
• Reduces tool wear and costly parts rejects
• Easy to use with a handy set-timer to operate on its own
• Adjustable flow rate filter from 10 to 30 liters/hr
• Kills bacteria (for best results run 1 hour for each 100 liters in sump; ozone function disinfects at 500 mg/hr)
• Built-in pH detector (optional) adjusts pH to control range
• Portable for use on multiple machines in the facility

PurifierPlus quickly pays for itself in savings

• Saves 10,0% to 25,0% on annual coolant cost
• Saves 30,0% to 50,0% on additional water cost
• Saves 10,0% to 25,0% on tooling costs and part reworks
• Reduces clean-up time 60,0% to 80,0% annually

The Li'l Sucker™ is the newest addition to the Yellow Bellied Sump Sucker™ line of sump cleaning vacuums. Based on extensive customer research and extended field trial experience, customers were able to tell us what they liked, disliked, felt had no value, and would change in the previous designs. The result was the Yellow Bellied Sump Sucker that customers designed. It is durable, highly maneuverable, easy to use, and provides exceptional suction and discharge flow rates.

• Removes the coolant, sludge, and chips from the sump
• Filters the sludge and chips from the fluid
• Returns filtered coolant to the machine tool sump, or
• Transports the coolant to waste treatment for disposal, or to a XYBEX Recycling System for recycling

Features

• Tank capacity of 50 gallons (190 liters)
• Suction rate up to 85 GPM (320 LPM)
• Discharge rate up to 40 GPM (150 LPM)
• 1.6 ft³ (45 dm³) chip basket holding capacity, roughly 12 gallons (45 liters)
• Available in both air venturi and electric models
• 120 VAC, single phase, 50 Hz/60 Hz electric model standard
• 220 VAC, single phase, 50 Hz/60 Hz electric model optional
• Complete with hoses and straight cleaning tool
• Optional cleaning tools available
• Perfect for today's smaller machine tool sumps