Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support

All Products For Region

TRIM

TRIM® C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

  • TRIM® C270WY

    High-performance Synthetic

    TRIM C270WY is a state-of-the-art synthetic coolant. C270WY provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness. Meets the needs of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Compatible with a very wide range of materials including: cast iron, steels and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carry-off for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
  • The residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one to two days

  • TRIM® C276

    Clean-running Synthetic

    TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odor which dissipates further after one or two days
  • Minimizes the buildup of sticky residues

  • TRIM® C350

    Premium Synthetic Metalworking Fluid

    TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

  • TRIM® C385

    High-lubricity Honing Synthetic

    TRIM C385 is a state-of-the-art synthetic coolant which provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness. C385 meets the need of the modern job shop for a single premium synthetic coolant for honing and virtually all machining operations.

  • Very low foam and mist
  • Great for form grinding, honing, boring, rolling, etc
  • Exceptional sump life and very good tramp oil rejection
  • Extremely low carry-off for very low total operating costs
  • Very low initial odor which usually disappears after 1-2 days
  • Compatible with dirty or grey cast iron cutting, grinding, and honing
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
  • The residual film is easily resoluble in the coolant working solution to facilitate easy machine cleaning and to minimize the buildup of sticky residues that can hold machine-destroying chips

  • TRIM® DRIVE CF3

    High-performance Fluid for Hard Disk Drives

    TRIM DRIVE CF3 is a specialized, chlorine-free, heavy-duty coolant formulated to meet the high-precision machining and stringent chemical restrictions of the Hard Disk Drive (HDD) industry. It has very good wetting and great lubricity resulting in excellent surface finishes and its ease of wash-ability makes DRIVE CF3 an excellent choice for HDD components manufacturers. TRIM DRIVE CF3 will run in high-pressure situations with little to no foam.

  • In addition to aluminum alloy, it is also suitable for a wide range of materials including steels and stainless steels
  • Low foam even in high-pressure operations without the use of silicone antifoam
  • Good hydrodynamic lubrication to perform reaming and threading applications
  • Excellent anti-weld properties without the use of either chlorinated or sulfurized EP additives
  • Keeps machines very clean while leaving a fluid, oily residue for ease of cleaning and reduced machine maintenance costs
  • Does not require special disposal and is easily recycled
  • Non-staining on aluminum alloys commonly used to produce HDD components
  • After machining, parts can be washed easily and completely in aqueous washing systems

  • TRIM® E206KS

    Long-life Emulsion

    TRIM E206KS is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E206KS makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Has a very wide application range allowing its effective use on cutting and grinding
  • Extremely hard water tolerance
  • Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
  • Provides good tool life and surface finishes
  • High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
  • Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
  • Coolant residue is easily removed with either water, working solution or aqueous cleaners
  • Good cleaning performance keeps machine tool very clean
  • Easy recycling or disposal with conventional techniques and equipment
  • Run effectively for long periods without the need for costly additives

  • TRIM® E709

    Long-life Emulsion

    TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range, suitable for both grinding and machining
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
  • Compatible with aluminum, steel alloys, cast iron, and yellow metals
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E709FF

    Long-life Emulsion

    TRIM E709FF is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E709FF makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Has a very wide application range allowing its effective use on cutting and grinding
  • Extremely hard water tolerance
  • Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
  • Provides good tool life and surface finishes
  • High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
  • Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
  • Coolant residue is easily removed with either water, working solution or aqueous cleaners
  • Good cleaning performance keeps machine tool very clean
  • Easy recycling or disposal with conventional techniques and equipment
  • Run effectively for long periods without the need for costly additives

  • TRIM® E712

    Low Maintenance, General Purpose Emulsion

    TRIM™ E712 is high quality universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protection film on the work piece and machine parts to prevent corrosion on metal surface including the machine tool. The stable and predictable performance of TRIM E712 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range. Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives. Easily recyclable and/or dispose with conventional recycling and/or disposal techniques

  • TRIM® E715

    Multi-metal Machining Emulsion

    TRIM E715 is a high quality, universal, soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs very well. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Non-chlorinated and non-sulphurized extreme pressure (EP) additives control built-up edge (BUE)
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron, and yellow metals
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E860

    Low-foam, High-lubricity Emulsion

    TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

  • TRIM® E860KS

    Premium, General-purpose Emulsion

    TRIM E860KS is a high quality, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range
  • Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives
  • Works very well in general machining where traditional soluble oil may not cool sufficiently

  • TRIM® E860KS bd

    Premium, General-purpose Emulsion - Blue Dye

    TRIM E860KS bd is a high quality, blue-dyed, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS bd makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Extremely hard water tolerant
  • Very wide application range
  • Suitable for both grinding and machining
  • Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, provides good tool life and surface finishes
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives
  • Works very well in general machining where traditional soluble oil may not cool sufficiently

  • TRIM® E935

    Premium Universal Emulsion

    TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

  • Very wide application range
  • Good hard water tolerance
  • Keeps machine tools clean
  • Works very well in general machining
  • Very stable formula provides good operational life with consistent performance
  • High tramp oil resistance for easy oil removal and longer coolant life
  • Easily recycled or disposed of using conventional techniques and equipment
  • Good balance of cooling and lubrication providing good tool life and surface finishes
  • Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

  • TRIM® E950

    High Performance Machining Emulsion

    TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® HyperSol™ 888NXT

    neo-synthetic precision aerospace machining fluid

    Experience ultimate versatility
    HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
    See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

    U.S. Patent 11,396,708

  • exceptional performance on hard aerospace metals
  • superior lubricity for machining softer aluminum alloys
  • trouble-free production
  • safest, environmentally-friendly ingredients
  • long-running lifespan delivers high customer value
  • less scrap, low foam and low odor

  • TRIM® MicroSol™ 455

    Low-foam Ferrous Semisynthetic

    TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

    Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminum alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

  • TRIM® MicroSol™ 585XT

    Extended-life, Nonchlorinated Semisynthetic

    TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol™ 590XT

    Advanced Technology Aerospace Semisynthetic

    TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

  • TRIM® MicroSol™ 642RX

    High-lubricity, Low-foam, Medical Grade Microemulsion

    TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

  • Conformance to EH&S requirements for the medical industry
  • Improved lubricity for longer tool life
  • Extended useful life without the need for tank-side biocides or fungicides
  • Halogen free formulation
  • Low foaming for today’s demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Superior corrosion inhibition on all ferrous and nonferrous metals
  • High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Ease of disposal with no special disposal or recycling techniques or requirements

  • TRIM® MicroSol™ 687NXT

    Premium High-lube PRTR Microemulsion

    TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
  • Greatly extends useful life without the need for tank side biocides or fungicides
  • Low foaming for modern high-pressure, high-volume applications
  • Uses standard metalworking recycling and disposal techniques
  • Does not contain any chemical listed under Japan PRTR regulation
  • Provides superior corrosion inhibition on all ferrous metals

  • TRIM® MicroSol™ 690XT

    High-lubricity, Low-foam Premium Semisynthetic

    TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol™ 692XT

    Premium, High-lubricity, Low-foam Microemulsion

    TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

  • TRIM® OG205

    High-performance Grinding and Honing Oil

    TRIM OG205 is a very-high-specification grinding and honing oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined mineral oil with low aromatic content, which ensures very low levels of mist and high flash point. TRIM OG205 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

  • No reaction with cobalt
  • Very highly refined base oil ensures low mist and high flash point
  • Can be used for light duty universal machining operations
  • Good flushing properties keeps grinding wheels very clean
  • Excellent friction reducing properties ensures long wheel life
  • Excellent heat transferring properties
  • Excellent oxidation stability
  • Highly filterable in pre-coat filter systems
  • Low foaming
  • Kind to machine components and elastomers
  • Light color and low odor for good operator acceptance

  • TRIM® OM 210

    High-performance, Cutting and Grinding Oil

    TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

  • Light color and low odor
  • High flash point
  • Minimal carry over loss
  • Excellent chips flushing and low foam
  • Oxidation inhibited for longer life
  • Excellent tool life properties

  • TRIM® OM 222

    High-performance Cutting Oil

    TRIM OM 222 is a high-performance, light color, straight cutting oil which reduces the formation of built-up edge in cutting hard-to-machine materials. TRIM OM 222 has a balanced extreme-pressure package for excellent finishes and tool life on variety of metals.

  • Excellent lubricity for efficient metal removal
  • Light color and low odor for good operator acceptance
  • Suitable for machining difficult ferrous and stainless steel alloys
  • High-quality raw materials resist oxidation
  • Lower viscosity allows better cooling
  • Safe for use on nonferrous as well as ferrous metals
  • OM 222 is excellent for use in screw machines and bar-fed, multi-station machines
  • The multi-metal compatibility of OM 222 makes it an excellent choice where a shop is working with a wide variety of materials

  • TRIM® SC310

    Microemulsion Semisynthetic

    TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

  • Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life and very low makeup for extremely low total operating cost
  • Low odor and mist makes for an operator-friendly product
  • Extremely effective EP additive package
  • Contains no nitrites, heavy metals, phenolic compounds
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® SC310 nd

    Microemulsion Semisynthetic - No Dye

    TRIM™ SC310 nd is a no dye, high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 nd is well-suited for general, high-speed machining and grinding of all materials.

  • Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life and very low makeup for extremely low total operating cost
  • Low odor and mist makes for an operator-friendly product
  • Extremely effective EP additive package
  • Contains no nitrites, heavy metals, phenolic compounds
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® SC410

    Chlorine-free Semisynthetic Coolant

    5 drum minimum batch order size. Pricing and delivery available upon request.



    TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.

  • Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
  • Low foaming in most operations
  • Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
  • Will provide superior sump life and corrosion inhibition for long periods of time without adds
  • Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron
  • Will keep the machine and work environment clean even when machining or grinding gray iron
  • Contains no chlorine or sulfur-based additives
  • Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
  • Very low carryoff and long sump life, delivering low operating costs
  • Hard water tolerant up to 30 grains

  • TRIM® SC686

    Semisynthetic

    TRIM SC686 is a semisynthetic coolant and is well suited for general high-speed machining and grinding of all materials. TRIM SC686 combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil.

  • Extremely effective EP additive package
  • Low odor and mist makes for an operator-friendly product
  • Easy recycling or disposal with conventional techniques and equipment
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
  • Has exceptional sump life and very low makeup for extremely low total operating cost
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

  • TRIM® SC686 - Blue Dye

    Semisynthetic - Blue dye

    TRIM SC686 is a blue dye semisynthetic coolant and is well suited for general high-speed machining and grinding of all materials. TRIM SC686 combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil.

  • Extremely effective EP additive package
  • Low odor and mist makes for an operator-friendly product
  • Easy recycling or disposal with conventional techniques and equipment
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
  • Has exceptional sump life and very low makeup for extremely low total operating cost
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

  • TRIM® SC9030SGM

    Cutting and Grinding Fluid Concentrate

    TRIM™ SC9030SGM is a high-oil semisynthetic coolant. This product provides the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC9030SGM is well suited for general, high-speed machining and grinding of all materials.

  • Compatible with a very wide range of materials including cast iron, steels, copper, aluminum alloys, and many plastics and composite
  • Provides superior corrosion inhibition on cast iron and other ferrous and nonferrous materials and eliminates the “hot chip” and clinkering problems often seen when machining cast iron
  • Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
  • Has exceptional sump life and very low makeup for extremely low, total operating cost
  • Low odor and mist makes for an operator-friendly product
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® SOL™

    General-purpose Emulsion

    TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® SOL™ LC sf

    General-purpose Emulsion, Nonchlorinated, Siloxane Free

    TRIM SOL LC sf is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.

  • For wide range job applications (from tough assignments such as gear hobbing and broaching to lighter duties like turning) TRIM SOL LC sf has proven equally effective
  • Easily adaptable to nonferrous and ferrous metals
  • Stability - TRIM SOL LC sf forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
  • Machine stays clean with TRIM SOL LC sf's built-in cleaning action - metal chips and dirt will not build up
  • Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® TAP HEAVY

    High-lubricity Tapping Fluid

    TRIM TAP HEAVY is a 100% synthetic and vegetable-based lubricant possessing strong friction-reducing properties. Designed as a tough operation product for use with metals of low machinability, it's recommended for use at full-strength, brush-on use for reaming, tapping, and threading.

  • Especially for taps ½" diameter and larger
  • Contains no mineral oils
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TAP LIGHT

    Tapping Fluid

    TRIM TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. Use with metals of low machinability; specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.

  • Especially for taps ¼" diameter and smaller
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TC 108

    Metalworking Fluid Defoamer

    TRIM TC 108 is a highly effective tank side additive used to control foam in metalworking fluid systems.

  • Paintable
  • Plateable

  • TRIM® TC 109

    Silicone Free, Tank Side Defoamer

    TRIM TC 109 is a silicone free antifoam or defoamer. It is used as a tank-side additive to control foam in water-miscible coolants, washing compounds, floor soaps, etc.

  • Antifoam
  • Silicone free

  • WEDOLiT

    WEDOLiT AS 1012

    Dewatering-fluid 104°F (40°C) flash point

    WEDOLiT AS 1012 is a dewatering fluid with corrosion protection properties. It uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can efficiently be dewatered. It is mainly used as an immersion bath at room temperature.

  • Due to its strong dewatering effect, residues of flushing water or water containing fluids including emulsions or synthetic coolants are removed from the metal surface
  • After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage
  • Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off
  • Development of a clear phase boundary between the water and the product, without forming an emulsion phase
  • Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCI foils
  • Excellent bath-life
  • Additive loss due to water contact: None

  • WEDOLiT AS 2251

    Long term DW Fluid 104°F (40°C) flash point

    WEDOLiT AS-2251 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing or rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Very low

  • WEDOLiT AS 4116

    High-Protection-DW-Fluid 140°F (60°C) flash point, thin film

    WEDOLiT AS-4116 is a leading edge corrosion inhibitor for steel and other metals, which offers long-term protection for indoor storage. Its low viscosity allows it to be used as an immersion bath, e.g. for the treatment of hollow parts. It can also be applied by spraying, flooding, brushing of rolling.

  • Ideal for overseas transport
  • Suitable for VCI-foils: The full corrosion protection is only given in the solvent-free film, therefore a short storage time until the solvent evaporates must be observed especially before packing in boxes with foils
  • Stable against acidic and alkaline contamination
  • Good material compatibility
  • Water displacing with very good wetting behavior
  • Easily removable with organic solvents (cold cleaners) or water-miscible alkaline industrial cleaners
  • Additive loss due to water contact: Extremely low

  • WEDOLiT AS 4143

    Dewatering-fluid 60°C flashpoint
    (aromatic content ≤ 2%)

    WEDOLiT AS 4143 is a dewatering fluid with corrosion protection properties. It uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can be efficiently dewatered. It is mainly used as an immersion bath at room temperature.

  • Due to its strong dewatering effect, residues of flushing water or water containing fluids including emulsions and synthetic coolants are removed from the metal surface
  • After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage
  • Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off
  • Development of a clear phase boundary between the water and the product, without forming an emulsion phase
  • Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCI foils
  • Excellent bath-life
  • Additive loss due to water contact: None

  • WEDOLiT EP 1090-E

    High performance expander oil

    WEDOLiT EP 1090-E is a highly viscous, high-performance, mineral-oil-based forming oil. The product has been developed to the highest technical standard for utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents the stick-slip- effect due to the high content of polar additives.

  • Very high film stability (even under high pressures)
  • Good adhesion properties on smooth surfaces, very good wear protection
  • Easily removable with water (spontaneous emulsification)
  • The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be easily separated into water and oily waste by the utilization of specific additives
  • The treated water can be reused for the preparation of a new emulsion (to a certain degree)

  • WEDOLiT EP 435 E

    Expander oil

    WEDOLiT EP 435 E is a highly viscous, high-performance forming oil based on renewable raw materials. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents, due to the high content of polar additives, the stick-slip-effect.

  • Very high film stability (even under high pressures)
  • Good adhesion properties on smooth surfaces, very good wear protection
  • Easily removable with water (spontaneous emulsification)
  • The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be separated into water and oily waste by the utilization of specific additives
  • The treated water can be reused for the preparation of a new emulsion (to a certain degree)

  • WEDOLiT EP 760 E

    Expander oil

    WEDOLiT EP 760 E is a highly viscous, high-performance forming oil based on renewable raw materials. The product has been developed to the highest technical standard for the utilization in the pipe industry (e.g. manufacturing of large diameter pipes, for gas and oil pipelines). The product can be used undiluted and prevents, due to the high content of polar additives, the stick-slip-effect.

  • Very high film stability (even under high pressures)
  • Good adhesion properties on smooth surfaces, very good wear protection
  • Easily removable with water (spontaneous emulsification)
  • The emulsion can be used for pre- and post-cleaning of the pipes and the expander head and can be separated into water and oily waste by the utilization of specific additives
  • The treated water can be reused for the preparation of a new emulsion (to a certain degree)

  • WEDOLiT FN 2451-850

    Fully synthetic forming oil

    WEDOLiT FN 2451-850 is a highly viscous, water-insoluble lubricant for wire drawing and other cold forming processes, e.g. deep drawing, extrusion or thread forming, of steel, stainless steel, and aluminum. The undiluted product is usually applied by brushes or by means of rollers.

  • Stable load carrying capacity and a homogenous sliding behavior
  • Reduces friction and wear and thus contributes to a high tool life
  • Outstanding wetting ability and film formation without adhesion
  • Stable cold start behavior, prevents stick-slip and chatter
  • Leads to clean surfaces and contributes to achieving dimensional accuracy
  • Easily removable with organic solvents or alkaline industrial cleaners

  • Master STAGES

    Master STAGES™ CLEAN 2020

    Washing Compound for Ultrasonic and Immersion Washers

    Master STAGES™ CLEAN 2020 is a concentrate very high-performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020's oil rejecting properties mean longer bath life and economical operation.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
  • Will provide extended in-process tarnish resistance on copper and copper alloy parts
  • Safe on aluminum, aluminum alloy, and magnesium
  • Will remove coolant residues as well as straight oils

  • Master STAGES™ CLEAN 2029 'One Step'

    Parts Washing Fluid with Corrosion Inhibitor

    Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
  • This formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

  • Master STAGES™ CLEAN 2115AL

    Low-foam Spray Washing Compound

    Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

  • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
  • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
  • Provides short-term corrosion inhibition on cast iron and ferrous alloys
  • Excellent biostability
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

  • Master STAGES™ CLEAN 3011

    Residue-free, Multi-metal Cleaner

    Master STAGES™ CLEAN 3011 is a concentrated multi-purpose fluid that excels as a liquid parts washing compound or corrosion inhibitor and does not foam even at room temperature in high-pressure spray washers. It will remove light oils and water soluble cutting and grinding fluid residues and leave behind a thin rust inhibiting film for in-process corrosion inhibition of ferrous parts. CLEAN 3011 is also safe for use on aluminum alloy, copper, brass, bronze, and zinc. CLEAN 3011 is an excellent choice in cast iron operations where it can be used for cleaning and rust inhibition with excellent biostability.

  • Silicate, phosphate, and boron free
  • Leaves no powdery residue
  • Low foaming for use in high-pressure spray washers or grinders and has excellent hard water stability
  • Has a moderate pH, excellent anti-corrosion, and does not require rinsing, making it an excellent short-term, in-process corrosion inhibitor
  • CLEAN 3011 maintains its alkalinity and biostability for long periods of time and will tolerate stagnant conditions such as leak test baths and hydrostatic leak testing applications

  • Master STAGES™ Task2™ GF

    Grime Fighter, Super Strength Industrial Cleaner

    Master STAGES™ Task2™ is a grime fighting, industrial strength, non-butyl, water-based cleaning agent that does an outstanding job in the industrial, commercial, or office environment. Task2 out-cleans all the green, crystal, purple, "mean", "complex", and "simple" butyl-based products you may have tried in the past.

  • Use full strength or dilute up to 100:1
  • For the toughest industrial cleaning applications
  • Pratt Whitney Aerospace Approval PMC 1247-1
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ Whamex™

    Machine Tool Sump and System Cleaner

    Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws many years of hands-on experience in machine clean outs
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

  • Master STAGES™ Whamex XT™

    Low-foam Machine Tool Sump and System Cleaner

    Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws on many years of hands-on experience in machine cleanouts
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

  • XYBEX

    Li'l Sucker™

    Suck it out with Li’l Sucker! Get rid of sludge, chips, & waste fast!

    XYBEX™ Li’l Sucker™ Fluid Management System – for quick, easy, and affordable sump cleaning

    Metal chips and fines in the bottom of machine sumps cause a host of problems: shortened coolant life, damage to workpieces, marred finishes, bacterial growth, foul odor, and dermatitis

    Every metalworking plant faces the problem of how to clean machines effectively yet minimize machine tool downtime. With Li’l Sucker, chips, fines, and sludge are quickly sucked from the sump without machine tools sitting idle for extended period

    Small but mighty 80-gallon Li’l Sucker



  • cleans sumps thoroughly while minimizing machine tool downtime
  • 2” hose sucks out sludge, chips, and other waste from sump
  • portable and fits where floor space is a premium
  • reusable easy-change liner filters to 50 microns

  • Mini Dos

    Proportional Injector Fluid Mixer

    Compact, low- to mid-flow, fluid-driven proportional injector. Segregates harsh chemicals from critical internal components.


    MISCO Palm Abbe™ Digital Refractometer

    Laboratory Precision in the Palm of Your Hand!

    The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision, but laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer.

    The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button. The custom-designed microprocessor delivers a nearly instantaneous readout in degrees Brix. Nonlinear temperature compensation is automatic and insures that fluids read between 0°C and 50°C (32°F to 122°F) are measured accurately.

    The large LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options.

    Calibration is automatic and does not require the use of special calibration solutions, or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.




    SCROUNGER™ Jr Oil Skimmer

    Effectively Remove Oil from Coolants and Washing Solutions

    Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.

    Tramp oil contributes to the growth and formation of:

    • coolant-destroying bacteria
    • undesirable residues on machine tools and workpieces
    • smoke and oil mist in shop atmospheres

    These problems result in:

    • shortened coolant life
    • poor material removal rates
    • poor surface finish and size control
    • decreased tool and wheel life

    Numerous devices ("floating ropes," wheels, and belts) have been developed over the years to remove "free floating" tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either "troublesome," high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations.

    As a "belt-type" skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER Jr. uses the same "oil loving" belt, but uses a more compact scraper blade to strip the separated oil from the belt.

    Features

    • 115 volt, single phase, 50/60 Hz
    • heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt, single phase, 50 Hz also available)
    • open, accessible oil-collecting tray with a convenient drain connector
    • "oil loving" oleophilic belt (purchased separately)
    • heavy-duty steel construction, with industrial-grade enamel paint

    Benefits

    • fast, simple belt changing
    • low maintenance
    • lower hang roller that will not fall off in the machine sump even in turbulent conditions

    Options

    • dewatering tray
    • portable kit
    • special length belts available on special order
    • special belt materials available for high temperature or pH applications on special order

    SCROUNGER Jr Belts

    • all belts 1" [25mm] wide
    • 24" [610mm]
    • 32" [815mm]
    • 44" [1120mm]



    XYBEX™ ChipOut™

    Chip & Sludge Remover

    A perfect match-up with the PurifierPlus is the XYBEX ChipOut. It is also a compact, easy-to-use, affordable solution for optimizing production. It simply and effectively sucks out the coolant, chips, and swarf to collect and filter all solid impurities and return clean coolant to the tank.

    Get the most from your coolant with ChipOut. It literally pays for itself in no time with significant cost savings.

    XYBEX ChipOut
    • Separates surface debris, bottom chips and swarf, and sediment from coolant
    • Extends coolant life
    • Improves surface finish on parts
    • Reduces maintenance
    • Uses diaphram pump air pressure, no electricity required
    • High suction power, flow rate of 180 liters/min
    • Runs during production without shutting off machine tools
    • Adjustable stainless steel filters: standard mesh 380 microns; optional: 830 microns and 180 microns
    • Optional floating device for maximum tramp oil collection
    • Portable and easy to use with multiple machines
    • Operates with water-soluble coolants or neet oils
    Cost effective ChipOut adds up to big savings
    • Reduces annual coolant cost
    • Reduces expensive parts rejects
    • Reduces maintenance to a minimum

    XYBEX™ ChipOut Plus™

    Magnetic Centrifugal Sludge & Chip Remover

    Looking for a fast, affordable way to have longer coolant life, reduce maintenance, and achieve better machinability and surface finish? Hardworking ChipOut Plus delivers all that and more in a compact, portable system that can hook up to machines throughout the shop.

    It does double time, as both a centrifugal and magnetic separator for water-based cutting fluids or neat oils. It’s simple to use, powerful, and efficient.

    First, the suction hose draws in the liquid and impurities. The filtration bucket traps large impurities before the sludge-containing fluid enters the centrifugal separator where fine particles are separated out by centrifugal force. The sludge then enters the powerful magnetic separator which efficiently removes magnetic metallic shavings and particles. Just like its name implies, it takes out chips - plus more!

    XYBEX ChipOut Plus
    • Separates surface debris, magnetic dust and shavings, chips, swarf, and sediment from coolant
    • Extends coolant life
    • Improves surface finish on parts
    • Reduces maintenance
    • Separates using centrifugal and magnetic force
    • Provides extremely fine filtration
    • No need to stop the machine
    • Quick filtration, easy to operate
    • Portable, use with multiple machines
    • No consumables needed
    Use hardworking, cost effective ChipOut Plus to reduce costs and build profits
    Save time and build up profits with ChipOut Plus.
    • Reduces annual coolant cost
    • Reduces maintenance and manpower
    • Reduces costly parts rejects

    XYBEX™ PurifierPlus™

    Cutting Fluid Purifying System

    The portable, cost-effective XYBEX PurifierPlus system pays for itself with material cost savings, reduced downtime and recycling costs. Not only does it enhance production and make the workplace cleaner, it also is better for employee health and the environment.

    Unlike units which simply separate machine tramp oil (the unwanted byproduct of the machining/metalworking process) from coolant, PurifierPlus has an ozone disinfection function which kills bacteria. Not only is the coolant cleaned and lasts longer, it’s purified and reused, and the subsequent problematic stench from bacteria and fungal growth is eliminated.

    Improve production, reduce costs, and experience a cleaner workplace with PurifierPlus.

    XYBEX PurifierPlus
    • Separates free tramp oil and extends coolant life
    • Reduces tool wear and costly parts rejects
    • Easy to use with a handy set-timer to operate on its own
    • Adjustable flow rate filter from 10 to 30 liters/hr
    • Kills bacteria (for best results run 1 hour for each 100 liters in sump; ozone function disinfects at 500 mg/hr)
    • Built-in pH detector (optional) adjusts pH to control range
    • Portable for use on multiple machines in the facility
    PurifierPlus quickly pays for itself in savings
    • Saves 10% to 25% on annual coolant cost
    • Saves 30% to 50% on additional water cost
    • Saves 10% to 25% on tooling costs and part reworks
    • Reduces clean-up time 60% to 80% annually